Unable to Pair RS507 using Telnet Client  with OS versions BSP 3.54.02

Version 10

    Verified Product Versions

    Wavelink Terminal Emulation 7.3

    Introduction


    Unable to Pair RS507 using Telnet Client on WT41N0, MC92 CE,WM OS v3.54.02 and VC70 OS v04.54.02. MotoBTUI.exe application should have Title name as "BT Information" for    Enabling Wavelink Client to work with RS507 BT Scanner.

     

    Description


    MotoBTUI.exe application should have Title name as "BT Information" for Enabling Wavelink Client to work with RS507 BT Scanner. This issue would be seen on WT41N0 OS version 3.54.02. The same issue might be seen on MC92 CE,WM OS v3.54.02 and VC70 OS v04.54.02. However use case is appropriate only for WT41N0.

     

    You will need to obtain the following files from Zebra directly


    SPR27525_MC92_VC70_WT_C70_all_0X5402_v1_0_NB.cab - CE devices (MC92CE,VC70,WT41N0) No reboot

    SPR27525_MC92_VC70_WT_C70_all_0X5402_v1_0_WB.cab - CE devices (MC92CE,VC70,WT41N0) With reboot


    SPR27525_MC92_W65_all_035402_v1_0_NB.cab - MC92 WM device No reboot.

    SPR27525_MC92_W65_all_035402_v1_0_WB.cab - MC92 WM device With reboot

     

    Device Compatibility

     

    This software release has been approved for use with the following Zebra devices.

    WT41,VC70,MC92

     

     

    Installation Requirements

     

    BSP version:  WT41- v3.54.02, MC92 - v3.54.02, VC70 - v04.54.02

     

     

    Installation Instructions

     

    For  installation of the PATCH:

    1. Copy provided cab file that you received from Zebra to the device.

    2. Deploy the solution by tapping on the cab file.

    3. After successful deployment of the cab file, device will do an automatic warm boot.