"SIP Toggle" SIP will only appear for a moment an then disappear

Version 2

    ENVIRONMENT:

    • CETerm 5.7.1
    • Zebra Motorola MC92N0 (MC9200)
    • Windows Mobile 6.5

     

    ISSUE:

    "SIP Toggle" SIP will only appear for a moment an then disappear on MC9200

     

    SYMPTOMS:

    • "SIP Toggle" SIP will only appear for a moment an then disappear.
    • If  "SIP Toggle" is used within a keybar the SIP keeps visible.

     

    Cause:

    This behavior is caused by the Motorola keyboard.

    Default configuration of the device is to hide the SIP if any hardware key is pressed (or released).

    CETerm shows the SIP, but the keyboard hides the SIP when the key is released.

    There is no way to disable this behavior, but there are two workarounds.

     

    Resolution:

     

    Method 1

    Remap the key to run a script that shows the SIP. The key is mapped to any "Script X" and you enter this script in slot X:

    CETerm.SetTimeout( "CETerm.PostIDA('IDA_SIP_SHOW',0)", 300 );

    You can increase the delay from 300 if needed. Do NOT mark it "Load at Startup".

    This script will show the SIP after the key is released, but the SIP will still hide if any hardware key is pressed.

    For more information please see the CETerm Scripting Guide:

    http://www.naurtech.com/docs/Naurtech_CETerm_Scripting_Guide.pdf

     

     

    Method 2

    Use custom ToolBar which has the few functions you need, including a SIP toggle.

    See http://www.naurtech.com/wiki/wiki.php?n=Main.KeymapKeybar