[SoftPhone] What are the SIP Phone settings found in the USERS.INI file

Version 1

    Details

    There are a number of undocumented user.ini settings for Softphone.   Below is a list of these settings and what they are used for.


    Resolution

     

                                                                                                                                                                  
     

    [SoftPhone]

     
     

    RecordingdDir=

     
     

    Windows Path

     
     

    Path to the directory to store the   recordings of the Soft Phone

     
     

    [SoftPhone]

     
     

    VoiceOutDevice=

     
     

    Windows   device name

     
     

    The audio output device to use to   output voice

     
     

    [SoftPhone]

     
     

    SysTonesDevice=

     
     

    Windows   device name

     
     

    The audio output device to use for   sytem tones (ring, dial tone, etc..)

     
     

    [SoftPhone]

     
     

    VoiceInDevice=

     
     

    0/1

     
     

    Enable/Disable voice in device??

     
     

    [SoftPhone]

     
     

    ProxyDomain=

     
     

    Proxy   Address

     
     

    Proxy domain

     
     

    [SoftPhone]

     
     

    SipPort=

     
     

    ####

     
     

    Default is 5060; the port to use   for the SIP protocol

     
     

    [SoftPhone]

     
     

    TypeOfService=

     
     

    #

     
     

    Integer from 1-256, 0 indicates   that type of service is not used.

     
     

    [SoftPhone]

     
     

    nRecordingBuffer= /   RecordingBuffer=

     
     

    ###

     
     

    number of seconds of voice data   kept in an internal buffer. When user clicks the “Record” button, buffered   data is written in the voice file so actual recording begins before the   button is clicked. Value can be in the range from 0 through 240, allowing up   to 4 minutes of voice buffering.

     
     

    [SoftPhone]

     
     

    BypassNAT=

     
     

    0/1

     
     

    Default is 0 purpose unknown

     
     

    [SoftPhone]

     
     

    AutoBind=

     
     

    0/1

     
     

    Default is 1 purpose unknown