.Loading..Loading.

Readme Rev

Service Updates

When the downloaded patch is run, it will extract to a folder and there will be zip files. Those files should be extracted and then Setup.exe can be run. This table outlines the names of the zip files and where they should be run.

ComponentCore/ConsoleClient

The following outlines instructions for installing this update.

This patch requires that LD 2016 be installed. For more information about current service packs please see LANDESK Community Doc 1001

Installing on the Core and Rollup Core

Because ADS may block files on Windows systems, it is recommended that you extract the patch on the machine you are going to install it on.

Prior to installing a patch on the Core Server it is recommended to make a backup of the LANDESK database.

Steps
  1. Disable any services on other machines that interact with the Core Server
  2. Double-click on the self-extracting executable and extract it
  3. Extract the files for the Core patch
  4. From the extracted files, run Setup.exe
  5. When Setup completes, reboot the machine if a reboot is required
  6. After applying the patch, you may need to re-activate your Core Server using the Core Server Activation Utility
  7. Restart any services stopped in Step 1

Note: The installer included with this release writes a detailed log that can be used to help troubleshoot installation problems. After running setup.exe from the patch, the log is located in the \ManagementSuite\log folder.

Installing on Remote Consoles

A Remote Console is any machine that is not the Core Server and has the LANDESK Management Suite Console installed. Console Machines need to be updated to be able to connect to the updated Core Server and Database.

Because ADS may block files on Windows systems, it is recommended that you extract the patch on the machine you are going to install it on.

Steps
  1. Close the Console
  2. Double-click on the self-extracting executable and extract it
  3. Extract the files for the appropriate patch
  4. From the extracted files, run Setup.exe
  5. When Setup completes, reboot the machine if a reboot is required

Note: The installer included with this release writes a detailed log that can be used to help troubleshoot installation problems. After running setup.exe from the patch, the log is located in the \ManagementSuite\log folder.

Updating the Agent

The patch should be installed on the Core Server before updating Agents

Use one of the following methods to re-deploy the agent once the patch has been applied to the Core or to apply the patch manually.

Methods of agent deployment

  • Manual: Map a drive to \\Coreserver\ldlogon and run 'wscfg32.exe -f'
    This is used for single client installs and testing
  • Push: Schedule a push of the full agent
  • Self-Contained EXE: Create an EXE that can be installed
  • Advance Agent: This is a two stage process. The Advance Agent consists of a small MSI and a self-contained EXE. The MSI is deploy to the client and then the MSI downloads and installs the EXE. This allows for bandwidth friendly downloads.
For more information on agent configuration and deployment see LANDESK Community Doc 23482

Manual installation of the client patch

Because ADS may block files on Windows systems, it is recommended that you extract the patch on the machine you are going to install it on.

  1. Double-click on the self-extracting executable and extract it
  2. Extract the files for the appropriate patch
  3. From the extracted files, run Setup.exe
  4. When Setup completes, reboot the machine if a reboot is required.

Updating the Agent With Patch Manager

LANDESK Patch Manager can also be used to update agent machines with the patch. Content and definitions can be found in Patch Manager as LANDESK Updates and can be used to detect and repair agents that have not been updated. The Core Server must be updated with the Core patch before updating agents.

Not all Component Patches will have Patch Manager Content created. Once it is generally available, this method can be used to update agents. For more information about updating agents using LANDESK Patch Manager see LANDESK Community Doc 24384

Please review the following important information about this release BEFORE installing this update.

More Information

Feature Changes and Updates

Antivirus

  • Update Mac AV to install Kaspersky 10 for OS X 10.11 support
    • -
  • Upgrade to KES10 SP1 MR2 (10.2.4.674) to support Windows 10
    • Upgrading KES requires a reboot. UI may not always refresh automatically, so you may need to press Shift-F5 to refresh UI to see rebranded UI.
      KES10 SP1 or newer clients get the pattern files from \ldlogon\antivirus8\Win\basesEP10 and pre-KES10 SP1 will continue to get the pattern files from \ldlogon\antivirus8\Win\basesEP.
      The scheduled task to download the pattern files ‘LANDESK Antivirus Updates’ should be upgraded to include all 5:
      • - LANDESK Antivirus Updates -> Mac AV
      • - LANDESK Antivirus Updates -> Windows AV vulnerability definitions (AV-###)
      • - Antivirus current -> KES10 SP1 MR2
      • - Antivirus 9.5 or legacy -> pre-KES10 SP1
      • - Antivirus 8.8 or 9.0 -> SDK version
      If the clients are not updating AV definitions, it’s good to check if AV definitions on the core are updated.
      MacAV (KES8 with patchM) has a known issue. If report dialog is resized, AV will crash.

Defects Fixed

Agent Configuration

  • 269625 Network View: Delete Device is missing mnemonics on buttons
    • LANDesk.ManagementSuite.StyledForm.dll
    • LANDesk.ManagementSuite.StyledForm.dll
  • 278553 DEU/CHS/JPN/CHT-Bad layout appears in Windows Embedded Standard agent configuration.
    • Adjusted text alignment in the Windows Embedded agent configuration
    • clientconfig.dll
  • 279334 Taskhistory.xml is removed when a reinstall of the agent occurs
    • Taskhistory.xml is preserved when upgrading the agent on a Windows client.
    • wscfg32.exe
  • 280290 Importing an "Agent Configuration" using "insert mode" will create a config that doesn't properly reference the imported behaviors
    • Fix client configs to remap the referenced guids before serializing the manually-generated xml when saving. Also, the DeleteFromDB of a core-synced item from a remote core fix is in. We call "BeforeSave" AFTER we tell the derived class to re-lookup all its guids. That way client config can use "BeforeSave" as an opportunity to build its manually-generated XML. Make GuidMapper.Lookup easier going (handles null input). The Firewall dataObj fix is in this shelf as well. Make sure to manually add the two extra reboot behaviors to the ReferencedBehaviors list.
    • data.dll PanelManager.dll
  • 285660 MD5 Certs may cause unexpected failure with LDMS 9.6+ Agents in FIPS 140-2 Mode
    • Modified brokerconfig.exe to check if its existing client certificate hash algorithm is md5. If it is, it will act as if it does not have a client certificate on the /n command line processing.
    • brokerconfig.exe brokerconfig_x64.exe
  • 285973 The find filter may be lost when refreshing the Manage Client Certificates page
    • Updated client cert tab to filter with check boxes and search term at same time.
    • gatewaybiz.dll gatewayui.dll
  • 288527 Unlocalized string "pending approval" certificate based authentication
    • -
    • ENUTranslations.xml
  • 289823 Logon Based Events are not being triggered in specific circumstances on some systems
    • Corrected a version problem with LDSystemEventCapture.dll so that it correctly registers the right version with COM same as the file version. If the wrong version is registered, it causes logon events to not be received by the local scheduler service. This fixes that problem.
    • LDSystemEventCapture.dll
  • 304734 Files missing in custom remote control agent created via "Manage Cloud Services Appliances"
    • Add missing SSL library files to package.
    • landesk.gateway.agent.dll

Agent Settings

  • 278602 Agent Settings may fail to CalculateHash, causing agents to not download updated settings
    • Call the new GetMD5Hash function in LDHashUtil_x64.dll. Use crypto for SHA1 at this time.
    • patchbiz.dll ldhashutil_x64.dll
  • 280604 2 of the referenced reboot behaviors aren't exported with the Agent Configuration when exporting/syncing/copying to core
    • Fix client configs to remap the referenced guids before serializing the manually-generated xml when saving.
    • data.dll PanelManager.dll

AMT-vPro

  • 215845 AMTProvMgr2.exe may crash in some conditions when clicking the short cut menu of “Setup and Configure vPro”
    • A non valid hostname was passed to AMTProvMgr2
    • AMTConfig.Data.dll
  • 255070 Selecting multiple devices at once to setup and configure vPro can cause an attempt to provision all vPro devices instead
    • Add new method to realize the "selected vpro devices" action.
  • 289633 vPro 10 & 11 devices cannot be provisioned by LDMS 9.6 & 10
    • Updates to remote secure erase.

Antivirus

  • 282768 'Database out of date' and 'Obsolete' configuration cannot pulled to client side
    • updated property values for database out of date and obsolete.
    • ldav.exe
  • 290439 Cannot use a wildcard in the middle of a path when entering AV exclusions in the AV setting
    • Allow user to input wild card character in Win AV exclusion list
  • 295201 Preventing AV from downloading 4000+ files after installation
    • Extracts bases files from install\setup\bases.cab to antivirus\temp_bases8\landesk so that ldav update task does not need to download all bases files.
    • ldav.exe vulscan.dll
  • 310434 Reduce current AV pattern files size by 700 MB
    • Changed application version for the latest AV from 10.2.2 to 10.2.4 which will reduce the size of pattern files.
    • getbases.exe

Auditing

  • 210825 Can't import archived auditing data from the shipping 9.6 SP1 console.
    • Fixed Auditing to archive data
    • LANDesk.Auditing.Archive.dll

BridgeIT

  • 277121 Workspaces packages always show Reboot Required 'Yes'
    • -

Console

  • 214882 LANDesk Security Certificate (LANDesk_##.crt) may not be created properly in the Core server where the OS Organization consists of the DBCS
    • genkey.exe dummy certkeyname ... /orgreg will read the organization from the registry (64-bit hive) and will ignore the 'dummy' argument (which was left in place for compatibility reasons). Get usage info with: genkey.exe | more
    • genkey.exe (Sharedtech)
  • 279161 Toggling focus between tree and list view doesn't update button enabled/disabled state in workflow UI
    • When the tree view or list view obtains focus, re-check the button states.
    • Workflowui.dll
  • 284845 Toolbox behavior error when pinned
    • Fixed toolbox in the LDMS console so when it is unpinned it doesn't go away when clicking on the group names.
    • winconsole.dll
  • 288159 Right-click "shutdown or reboot..." fails with unlocalized message "@@The current user does not have sufficient rights" when user is not an admin (but has deploy rights)
    • Allow remote execute (right-click scan now) if user has compliance deploy, package deploy, security config deploy, or patch deploy rights in addition to the previous "execute programs edit" right.
    • data.dll core.secure.dll
  • 288163 Right-click reboot within scheduled tasks fails with an object reference error
    • Make sure the machine type and operating system name are added to the RequiredFields that are returned for each target device. These are typically required columns for the "Computer" object but were not getting obtained by the task scheduler pane.
    • softwaredistribution.winui.dll
  • 289595 Query dialog can corrupt "extended" DAL queries when attempting to change view columns
    • Make sure we notice an "extended" DAL query and don't try to convert to/from BNF when in the properties dialog.
    • data.dll winconsole.dll
  • 295199 Remote console only: "Copy to other core(s)" menu need to be disabled on Roles' right-click menu.
    • Updated scopes
    • LANDesk.ManagementSuite.WinConsole.dll
  • 301406 Unapproved clients popup is showing for non-admin users
    • Only set the timer for the nag message popup to be enabled if the logged on user in as administrator.
    • LANDesk.ManagementSuite.WinConsole.dll
  • 303247 Tab key should only bounce between Yes and No
    • Fixed tab order
    • LANDesk.ManagementSuite.StyledForm.dll

Content Replication

  • 280874 Vulscan.exe is blocking the content replication if there is network connection loss
    • Made a function that would release locks in the curl helper that were left open when a thread in curl crashed.
    • lddwnld.dll
  • 289144 Content replication fails to create a manifest file because it fails to decrypt the password
    • Fix the comparison operator to be || instead of &&.
    • filereplui.dll (2/12/2016)
  • 298176 The File Replication error when not able to get credentials from the core is not descriptive
    • If vulscan's status UI is visible, it will show a message when it fails to decrypt a string. It will tell the user to refer to the log for more information. The log shows the core's refusal response code or "ConnectionFailed" which is a home made string when we either can't contact the core or can't parse the response body. Vulscan sets its global return value to 514 if there isn't an error already set. This could be overwritten by a later error by vulscan, though. Added a new status string to be displayed in the console for task status if vulscan does return the error 514.
    • enusdsts.dll, vulscan.dll, enuvulscan.dll
  • 302723 Replicator removes files on the target preferred server if the file list is incomplete and mirroring is enabled
    • Recover from a missing or incomplete file manifest. Have the downloader rebuild the manifest in case of one of the aforementioned errors.
    • vulscan.dll

Core Sync

  • 276205 An incomplete line of text may appear in the "Sync component selection" window
    • move overlapping controls apart
    • winconsole.dll
  • 280018 Exporting an agent configuration loses the referenced Windows firewall setting
    • Fix client configs to remap the referenced guids before serializing the manually-generated xml when saving.
    • data.dll PanelManager.dll
  • 280263 A Remote console delete of autosync item doesn't delete item on target cores
    • In Exportable.DeleteFromDB(), reload SyncEnabled and ID by using the Guid. Then we won't fail to get the SyncEnabled and assume it's a "No" value because ID hasn't been loaded yet.
    • landesk.managementsuite.data.dll
  • 284009 Target core must be configured with a member of LANDESK Administrators group for Core sync to work
    • User needs to be in LANDesk Administrators group on the core. Test button also checks if the user is in LANDesk adminitrators group or not.
    • LANDesk.ManagementSuite.Authentication.dll core.secure.dll LANDesk.ManagementSuite.Data.dll LANDesk.ManagementSuite.Winconsole.dll
  • 286481 There is no "software scan" in auto sync components.
    • Updated options
    • datamart.xml

CSA

  • 269910 CSA: Remote Control Through CSA w/ 3rd Party Cert Fails
    • -
    • issproxy.exe
  • 285506 When using the CSA failover policy and running BrokerConfig.exe as Admin, it may only see the default CSA information
    • Fixed issue in writing broker.conf.xml in which it wouldn't write the value if the document was empty.
    • clientconnectivitybehavior_apply.dll
  • 295535 'Error Synching Certificates' dialog appears on top of Windows dialogs
    • Message box stays on top of the desktop, should only stay on top of the console windows (application modal)
    • Landesk.managementsuite.styledform.dll

Custom Data Forms

  • 279636 With some languages a custom data form contains garbled character(s) when custom data form field is added to an existing form
    • Fixed issue with custom data forms editing in the LDMS console that for Asian languages would cause some entries to get back characters inserted.
    • customdataforms.dll

Dashboards

  • 277748 Wrong tooltip for "Add charts" tool button on dashboard window
    • Fixed a tooltip for add charts.
    • DashboardUI.dll

Endpoint Security

  • 236507 LANDESK Firewall "Exception requested by users" is blank on Console
    • It was not a bug, but a design issue. Re-designed according PM specifications
    • LdSecSvc.exe LdSecSvc64.exe Patchbiz.dll PatchManagement.dl
  • 260780 Display issues with new user interface for Endpoint Security
    • Fixed a typo. Fixed some display issues on hi-res screens (3k & 4k screens)
    • EPSUI.exe
  • 262988 Unable to apply exception by hardware id on floppy drive
    • Floppy drive doesn't work as standard volumes and need a specific code to get the hardware ids.
    • LdSecSvc.exe LdSecSvc64.exe
  • 265109 Potential memory leak when importing files to a new trusted file list
    • The Dispose method was not called after showing the import dialog. It must be explicitly called Fix: added an using { } block
    • PatchManagement.dll
  • 275141 Running LDEncrypt.exe on a device without LDMS agent does not open Encryption GUI
    • Cause: EncArchive was called from the root of the usb device, but it resides in the EncArchive folder.
    • LDEncrypt.exe
  • 275230 EPSUI.exe sometime stop responding
    • Fixed a race condition that can hang the EPS UI when refreshing the process list.
    • EPSUI.exe
  • 275852 File reputation test failed in CSA mode.
    • Added proxyhost support in the EPS client
    • LdSecSvc64.exe LdSecSvc.exe
  • 283195 The EPS UI may crash on system with more than one user sessions opened
    • Root causes: #1. permissions issue on a shared mutex (access denied from other user account) #2. file access violation when writing on the EPS debug log from multiple processes Fixes: #1. fixed permissions #2. separate debug logs per processes
    • EPSUI.exe
  • 283198 The EPS UI may have high CPU usage when a lot a processes are executed at the same time
    • Refactored code related to the process list in EPS UI
    • EPSUI.exe
  • 283523 Device Control: Wild card (*) doesn't work well on the exception setting
    • Was not implemented. Added missing code by customer request.
    • LdSecSvc.exe LdSecSvc64.exe
  • 286574 Batch Import IP Address does not allow for subnets or IP ranges
    • LANDESK Firewall batch import: Added support for IP subnets (i.e. 192.168.0.1/24 or 192.168.0.1/255.255.255.0) and IP ranges (ie 192.168.1.1-192.168.1.49)
    • PatchBiz.dll PatchManagement.dll
  • 290268 HipsClientConfig.exe hangs if missing files for EPS install
    • Cause: If some setup files are missing (LDSecSetup*.exe) the HipsClientconfig.exe process may display an error box. When installing through vulscan in non interactive mode, the user doesn't see the message, and the process hangs forever. Fix: Correctly stop the installation process if some the required files are missing
    • HipsClientconfig.exe
  • 290963 LANDesk encryption utility may bypass the write protection, and/or shadowcopy
    • Root cause: Since the LANDESK Encryption Utility was allowed to bypass the write protection on removable module, it was not monitored at all by Device Control. Resolution: Process that can bypass the write protection on removable modules are now monitored by Device Control
    • LdSecDrv.32 LdSecDrv.64
  • 296985 Endpoint Security is adding .TMP files to the FILEINFO TABLE
    • Cause: Some temporary programs (created by installers) are unnecessarily stored in the LDMS database when using the EPS client with the file reputation feature enabled. Fix: Avoid storing temporary programs in the LDMS database, just return to the endpoint the requested reputation value
    • patchbiz.dll
  • 298422 Preventions by Application Displays incorrect data if MD5HASH is blank
    • Cause: the console is not able to filter items that don't have md5 hash Fix: implemented filter using sha1 if md5 is missing
    • patchmanagement.dll patchbiz.dll
  • 300121 The EPS client may not ask for a password when going to the process list and double clicking on processes there
    • Cause: coding error: missing code. Fix: added missing code
    • EPSUI.exe
  • 300498 Endpoint Security UI not responding - large number of preview icons stacked up from program in Windows taskbar
    • Cause: race condition causing EPSUI to hang when too much popups are displayed simultaneously Fix: use only one thread to display popups
    • EPSUI.exe
  • 302724 TOSHIBA VIDEO PLAYER cannot play a video file
    • Cause: The device filtering set-up by the EPS client (Device Control) is seen as a security breach by the audio protection. Fix: Avoid attaching to the HD Audio bus
    • LdSecDrv.32 LdSecDrv.64
  • 303762 Application control activity source code expose "String not found:HipsActionCode.VIGMODE_ALERT_MONITORED_DIR_MODIFICATION"
    • Fix: Added a filter for the action code VIGMODE_ALERT_MONITORED_DIR_MODIFICATION, that must not be displayed in the app control activity list
    • patchbiz.dll
  • 304213 CdDvd exception doesn't work as expected if the exception is set to 'Allow'
    • Cause: exception that allow a device over a denied bus doesn't work. fixed.
    • LdSecSvc.exe LdSecSvc64.exe
  • 304971 The EPS UI sometime cannot access the EPS service information
    • Cause: if the user session is opened very quickly after the computer started, the EPS UI may start before the EPS service is fully initialized, causing the EPS UI to malfunction.
    • EPSUI.exe
  • 305767 Unsigned LDMS console binaries don't have the expected permission on Windows x64
    • Root cause: The EPS client expect that the LANDESK binaries are located into C:\PROGRAM FILES (X86)\LANDESK on Windows x64 That's the case for the binaries related to the LANDESK agent But the binaries related to the LDMS remote console are located into C:\PROGRAM FILES\LANDESK Fix: Added both folders as trusted folders on Windows x64
    • LdSecSvc.exe LdSecSvc64.exe
  • 308276 EPSUI.exe may causes issues on restart of Window 7 and 2012R2 client
    • Cause: race condition while accessing the tray icon handle, causing the UI to hang at startup
    • EPSUI.exe
  • 308538 EPS blocking cmd files although all blocking is disabled
    • Cause: The folder C:\Program Files (x86)\LANDesk\PXE was not listed as a LANDESK folder on the EPS client. Fixed.
    • LdSecSvc.exe LdSecSvc64.exe

Inventory

  • 276832 The serial number of hard drive is different from the sticker on hard drive
    • Convert hex-encoded serial numbers to display format
    • ldiscn32.exe
  • 277133 Authentication results should always be logged in inventory
    • Removed 'log authentication results in inventory' checkbox and set to always log the info
    • winconsole.dll landesk.managementsuite.data.dll
  • 283253 LDISCN32 crashes if a path before the equals sign is longer than 512 bytes in the invdelta.dat file
    • Fixed crash in ldiscn32.exe if a file path if longer than than 512 bytes in invdelta.dat.
    • ldiscn32.exe
  • 284060 Corrupt custom data duplicate branch may be created when adding a new custom registry data on a French core server
    • fix for corrupt meta-data when adding Custom registry items on a French core.
    • ManageLdappl.dll
  • 284286 Inventory scanner may not accurately report the number of CPU cores on some servers
    • Revised CPU topology discovery algorithm.
    • ldiscn32.exe miniscan.exe
  • 286521 Inventory Service taking 30 minutes plus to load under some limited conditions
    • Updated to process data more efficiently in the inventory scanner. Especially in the load time.
    • ldinv32.exe
  • 288011 Inventory for Microsoft* Surface* Pro 4 Windows* 10 shows up as "Type = Desktop"
    • Fixed the inventory scanner to properly identify Microsoft Surface Pro devices at Type "portable" instead of "workstation".
    • ldiscn32.exe
  • 289694 LDMS Agent Components show up in the Inventory Report of Apps that Crashed
    • fixed app crash in gpmm.exe.
    • gpmm.exe
  • 289747 Inventory service doesn't allow enough time for self-scan with software on some Core servers
    • Fixed inventory service to wait 60 minutes, instead of 20 minutes, when running the inventory scanner.
    • ldinv32.exe
  • 289763 Some attributes are missing primary key value from MetaEquivalents
    • Added an attribute to metaequivalents
    • datamart.xml
  • 289769 Inventory service decomp thread not shutting down properly
    • Give time for the decomp thread to shut down.
    • ldinv32.exe
  • 289778 Inventory of computer location should not include the computer name
    • In Cannonical name format, remove computer name and return rest name write as shortname in LogonHistory\Location registry in the
    • ldapinfo.dll ldapwhoami.exe
  • 290203 Windows 10 Enterprise LTSB and Windows 10 Education editions are not reported correctly by inventory
    • get windows 10 versions (LTSB and Education).
    • ldiscn32.exe
  • 290708 Inventory server is not correcting the IP address of received Delta scans on multi-homed devices
    • process appended connection address when on compressed delta scan file.
    • ldinv32.exe
  • 293354 Restore Client Device ID pairs through Inventory may be missing their second half in some instances causing innacuracies in restoring
    • .
    • ldinv32.exe scaninstructionsData.dll
  • 293470 Symantec EP 12 doesn't get picked up entirely correctly by LDAVHLPR - Virus Definition Server missing
    • It's because the antivirus product is Symantec, not LANDESK AV, so the Virus Definition Server was not reported. Now it's fixed to report the Virus Definition Server even if the antivirus product is not LANDESK AV.
    • ldiscn32.exe
  • 299226 Degradation Monitoring doesn't happen if a mixture of delta scans and full scans are processed within the time period
    • Fix in degradation monitoring.
    • ldinv32.exe
  • 302365 ldiscn is reporting wrong or garbeled harddrive serial.
    • Convert hex-encoded serial numbers to display format
    • ldiscn32.exe miniscan.exe miniscan_x64.exe
  • 303301 All Foreign - "Decryption status" is not localized in Agent inventory->LANDESK Management->Based on Agent certificate security
    • Fixed localization problem
    • enutranslations.xml

LD Download

  • 281125 Error downloading PXE Rep deployment package when targeting multiple devices per subnet
    • There are some situations with dependent packages where the same file may be added to the set of download files twice. There were some situations with peer download where this caused the complete file to be deleted. Now whenever downloader is about to download from peer, it checks for the current size of the actual file, not just rely on the state in the file info object it uses.
    • lddwnld.dll
  • 288200 TMCSVC may grow in memory consumption
    • Fixed memory leak in tmcsvc.
    • tmcdll.dll
  • 293372 Peer without the file (with no plan to download it) can randomly reply that it has the file
    • Uninitialized memory in a peer discovery structure can cause a peer without the file to reply that it has the file. So now the memory is initialized.
    • lddwnld.dll and lddwnd_x64.dll
  • 297250 LDDWNLD may fail when going over a slow link with a lot of latency and dropped packets
    • Fixed issue where curl was being given an invalid pointer for the write_function
    • lddwnld.dll

Linux-Unix

  • 147690 Security Vulnerability: *-IX - World-readable vulnerability scan files
    • The following file permissions are now used for 64-bit Agent RPM packages (not cba): PREFIX Directory - 755 bin/ - 755 bin/* - 750 etc/ - 755 etc/* - 640 except landesk.conf which is 644 jobs/ - 750 jobs/* - 640 schemas/ - 750 schemas/* - 440
  • 192912 Linux: Primary Owner of machine may not be reported correctly
    • The last command was not executing correctly. Rewrote the command to read wtmp directly to find the user with the most time logged in.
  • 295544 Sdclient makes failed directory in "/" and puts all failed policy tasks under it
    • failed policies now get placed in /opt/landesk/policies/Software Distribution/failed for failed software distribution tasks.

Localization

  • 292573 There are unlocalized strings in Distribution Package in Schedule task dialog
    • Change layout to not cut off strings in the UI
    • LANDesk.ManagementSuite.SoftwareDistribution.WinUI.dll

Mac

  • 275171 Error 45 when mounting share after booting from USB Netboot
    • -
  • 277943 Macintosh inventory records overwrite themselves when the agent is installed with the same thunderbolt adapter
    • -
  • 285834 Can't save Core Cert Selection for Mac Agents
    • Fixed issue that prevented changes in the selected core certificates (i.e. .0 files) for Mac Agents to be saved from a remote console.
    • PanelManager.dll
  • 292483 Can't create miniscan file when booted from Stamper-created NBI
    • We resolved the permissions problems that were causing this defect.
    • LANDESK Startup Disk Stamper.app
  • 297472 Distribution tasks that properly fail when run with no user logged in report an incorrect result to the core
    • -
    • .
  • 298978 Mac Provisioning: Netboot failed on mac client El Captain via scheduled template.
    • -
  • 306070 Mac Agent configuration: Failed to list the default settings on “Scan and repair settings” option
    • -
    • .

Mac AV

  • 269966 MAC agent does not install SWD package unless the user is logged in.
    • We now launch install jobs in the correct context if the user is logged out.
    • ldswd, ldapm

Manage Scripts

  • 297999 "Current status" option for Scheduled Manage Script tasks prompts to cancel the task.
    • Fixed a copy/paste error that cause the wrong event handler (Cancel instead of Current status) to be called.
    • LANDesk.ManagementSuite.SoftwareDistribution.WinUI.dll
  • 302934 Wrong message when clicking on "Current Status" of a scheduled task for "Manage Scripts"
    • The wrong handler was added to the event which was calling the wrong method.
    • LANDesk.ManagementSuite.SoftwareDistribution.WinUI.dll

Mobility

  • 274313 Mobile settings need to be grouped together and labelled with a common prefix
    • Attempt to group the mobile agent behaviors together in the change settings window
  • 281126 Android Wifi EAP Type incorrectly sends TTLS instead of PEAP to agent
    • Fix for not sending the proper values to AndroidAgent for PEAP wifi security Fixed crash in android agent during wifi credential collecting and added the client security doc
  • 295115 If credentials are not sent with WiFi setting, device prompts but cannot connect to SSID with valid credientials
    • Need to install the updated Android Agent from the app store for resolution.
  • 298488 Android prompts for username and password after applying WPA2 Wifi
    • AndroidAgent - fix for crash when enforcing WPA or WPA2 personal wifi. Fix for not enforcing subsequent passcode settings. Fix for prompting user for credentials when enforcing wpa/wpa2 personal wifi.
  • 298503 Android Agent does not enforce subsequent passcode policies
    • AndroidAgent - fix for crash when enforcing WPA or WPA2 personal wifi. Fix for not enforcing subsequent passcode settings. Fix for prompting user for credentials when enforcing wpa/wpa2 personal wifi.
  • 298666 Schedule target multiple mobiles via LDAP results in task stuck in Waiting status
    • Fixed LDAP targeting task status
  • 299197 Android diagnostics crashes agent when you try to send a log file
    • AndroidAgent - Many fixes for LogCat crashes and also a fix for loss of logcat menu display
  • 301106 Android agent crashes when diagnostics are being shown and device is rotated horizontally
    • Fix Android Agent so that it doesn't crash while rotating view

Monitoring

  • 276385 Reporting/Monitoring dialog appears incorrectly in Manage software list
    • Fixed UI bug where content overlaid titlebar.
    • ManageLdappl.dll

Patch Manager

  • 215719 "Notify user before downloading " doesn't work for patch
    • State that the "notify before download" is a "(Distribution-only)" feature in the config UI.
    • PatchManagement.dll
  • 215727 Enabling and disabling detection rules is not always working correctly.
    • When building the context menu, if there is more than one item selected, then just always show both the "Scan" and "Do not scan" menu options, even if all items are already scan or already "do not scan" mode. Change the "updating" background UI to use the "ProgressWithCancel" capability.
    • patchmanagement.dll
  • 249238 Maintenance time window in the the patch and distribution settings is unclear when Core regional settings do not use AM/PM indicators
    • Sets custom format of start time and end time depending on the short time format specified in the region settings.
    • PatchManagement.dll
  • 250032 Entering a large address in CVSS information field in a custom definition causes rule to be deleted or not saved
    • I put a max size limit in the edit control of 1000 characters and increased the max allowed size in the database to 1100. I also bumped up in the db the max size for the patch URL and the FAQ URL but didn't tinker with the UI associated with them.
    • datamartpm.xml (need to do a coredbutil with this file) patchmanagement.dll
  • 269889 Importing a vulscan results-file will result in a _034 file, when it should accurately reflect the vul-types that were actually processed
    • Fixed: Use the xml element "" when building up the unique filename for putting results. Since that value is always "100" when sending group scan results, use commandline "/group=" value for unique putresults filename. Make providing deviceID optional when importing scan results. The sender will pretend that its device id is what was found in the results xml if none is provided. Beware, this import feature still won't work if the core is in secure mode (LDMS 10.0 and beyond) because the core cross-references the device's certificate information with its device ID (to prevent falsly sending scan information on behalf of another machine).Also note, that a workaround was available by specifying "/group=SomethingUnique" on the vulscan commandline. That "SomethingUnique" value would be embedded in the submitted vulscan results file, allowing it to be different than other posted scan result files.
    • vulscan.dll
  • 270505 Duplicate hotkey 'S' in general tab of Rollout project property.
    • Removed the duplicate mneumonic.
    • workflowui.dll
  • 274754 Reboot task override option does not work if vulscan/sdclient is busy
    • Reboot now action will pass /ignoreLANDeskTasks if ignore LANDESK tasks option is selected and it will disable WaitMyTurn option.
    • patchmanagement.dll
  • 277872 Disable "Go to Gather Historical Information" link in chart if the user does not have Patch and Compliance Deploy rights
    • Shows a link only if the user has patch deploy rights and not on rollup core. That is the same check as schedule toolbar button on Patch and Compliance tool that includes gather history menu item.
    • PatchManagement.dll
  • 279372 Problem with window resizing when downloading associated patches
    • Anchor is set to bottom left.
    • patchmanagement.dll
  • 281530 Ability to select any default scan state when downloading new content (instead of just "unassigned" or "scan")
    • 10.1 Dev branch only: Added a combo box dropdown in place of the checkbox on the download form so the administrator can select what default scan status to assign each newly downloaded definition. This option is still ignored by blocked app content. When upgrading from a previous setting, "AutoInclude=false" is assumed to mean "Unassigned" and "AutoInclude=true" is "Enabled".
    • patchbiz.dll, patchmanagement.dll
  • 281549 Repainting issues when auto-sizing "PanelManager"-based dialogs
    • Revamp the auto-sizer to pre-grow to the maximum size needed before displaying anything.
    • ldpropertysheet.dll
  • 286452 Patch Manager ST000016: On some machines, a weak user password may not be properly detected
    • Increase the timeout from 30 seconds to 2 minutes when waiting for password guessing threads to complete. Added logging if we do fail for any reason. Place a string "<password checker timed out>" into the "weak password user" list if there was nothing there when we timed out so the definition will be "detected."
    • vulscan.dll
  • 286865 Patch toolbar icon for Add Chart is disabled for most type filters
    • Look at the selected node and decide whether we're checking for "add charts" rights versus "create new custom definition" rights.
  • 288184 Download update on remote console quits with no error after failing to write to \\corename\ldlogon
    • I put a try/catch around the UpdatesList.GetUpdates() call so if it fails due to an access denied, we'll display an error, but still continue.
    • patchbiz.dll
  • 289159 Uninstall tasks showing hashtags and numbers instead of icons
    • Changed list view to owner draw so it'll allow me to put the images in the columns.
    • PatchManagement.dll
  • 289204 Device reboots after pressing "R" with a reboot prompt
    • Hook PreTranslateMessage and disallow pretranslation of plain old keydown messages. Alt-keydowns don't even come through there, so Alt-R will still reboot the machine. But pressing 'R' will no longer do so.
    • ldReboot.exe
  • 289338 Vulscan 'continue' fails to repair all but 1st item after rebooting
    • Don't keep a mutex in the wrong thread. Put vulscan /continue into local scheduled tasks if we timeout waiting for the mutex (not just if we're outside the maintenance window). Don't try to keep plucking items from the continue list if we timed out getting the mutex last time. Mutex objects logs when it acquires/releases. Add repair task to "continue" list if we can't get the mutex (only scan tasks were getting added -- although repairs are written as a scan task now).
    • vulscan.dll
  • 289447 Reboot "Time" and "Time_Readable" not written to registry when doing vulscan /rebootwithui
    • In "SetRebootRequired" make sure to set the "time" registry value if we aren't in "never reboot" mode. Otherwise, we continue to make sure that we delete it in that same place. Only set the value if vulscan is being asked to handle a reboot needed situation or do a reboot with UI.
    • vulscan.dll
  • 303297 There is no computer will be added to the task while creating an uninstall Patch task with "Add all computers with this patch" option selected.
    • add targets after task commits.
    • patchmanagement.dll
  • 305216 The icons of "Scan Information" and "Computers out of compliance" didn't work
    • Update for Localization When the dialog is re-sized, make sure that a handle is created properly
    • Patchmanagement.dll
  • 311811 FRA/DEU/ESP - Bad format for Patch Charts as list: "Recent Vulnerability Scan % Change" and "Recent Inventory Scan % Change"
    • 90.5 days ago was converted to 90,5 in FRA, DEU and ESP which made the SQL statement invalid. It now uses DATEADD function instead.
    • LANDesk.ManagementSuite.Data.dll

Power Manager

  • 295591 The option 'Enable process sensitive trigger' may not save successfully
    • Correct the checkbox status when loading this panel.
    • LANDesk.PWM.WinUI.dll
  • 295611 Incorect IDs for Process-sensitive trigger list and End process list
    • Change product id into the index of the process.
    • LANDesk.PWM.WinUI.dll

Provisioning

  • 278049 WINPE (x:) running out of disk space when HII runs causing the action to fail.
    • Fixed an issue that could cause Winpe to run out of disk space when doing HII.
    • hiiclient.exe
  • 280594 Spaces in UNC patch not accepted in Map/Unmap Drive Action
    • Fix an issue not allowing paths with spaces when mapping a drive.
    • landesk.provisioning.business.dll landesk.provisioning.winui.dll ldprovision.exe
  • 284896 Newly modified template creates a new locked template every time it is PXE booted
    • Fixed an issue that caused additional locked templates to be created when PXE booting.
    • landesk.provisioning.business.dll prov_schedule.exe
  • 288165 Provisioning UI cuts off bottom actions in action list.
    • Fixed an issue where the UI was being cut off.
    • provisiongui.exe ldprovision.exe ldprovision.sig
  • 289703 HIIclient does not match Windows 10 drivers
    • Added a fix to detect Windows 10 more reliably in HII.
    • hiiclient.exe
  • 301013 Creating capture or deployment templates does not automatically create shortcuts within selected group
    • Fixed an issue where shortcuts to the template were not created in custom groups when using the capture or deploy templates functionality.
    • Landesk.Provisioning.WinUI.dll Landesk.Provisioning.Business.dll
  • 302202 Conditionals may not work with included templates
    • Fixed conditionals in included templates
  • 305442 Machinees may not start a provisioning scheduled task when already in WinPE at the "credentials" screen
    • Fixed an issue where if a machine was tragetted after being PXE booted and waiting at the login screen, the task would never start properly.
    • provisionGUI.exe

Query

  • 303447 User cannot edit qualifier of query when user has restricted scope
    • In non-English languages, if a scoped user tried to edit a qualifier on a query, they would receive an error stating that the qualifier was invalid.
    • idal.dll ldcache.dll

Reboot Settings

  • 237343 Client is not rebooting when locked and a reboot window later is set in the reboot setting.
    • when local scheduler initializes, it no longer deletes volatile tasks if they are properly stored in a volatile registry key. This will keep it from deleting tasks if it happens to restart due to a crash or other intervention. Crashes unfortunately plague local scheduler because it's at the mercy of the windows event capture system, which tanks every now and then, forcing localsch.exe to restart (and previously causing it to wipe out reboot tasks). Unfortunately, the “one hour delay” that is applied to the “lockedor logged out” options is implemented as an “auto delay” filter. That filter only starts the countdown processonce EVERY OTHER filter has been passed. So that means the 1 hour countdown doesn’t start until the user islogged off AND it’s in the time window. So a 1 hour time window will be exactly short enough to keep the reboot from everhappening because it must wait an hour after entering the time window. Discussed a change to stop the “auto delay”from even looking at the time of day, day of week, day of month filters. That way it would begin its countdown as soon as any other filter was met (such as logged in, logged out, locked, or whatever else there might be). That change seemed a little scary because it changes the scheduler’s behavior for all existing customers. So the workaround I recommend in this case is to either increase the “time window” in your bottom portion of the form or reduce your “locked or logged out for” window in the upper part of the form so there’s enough time for all filters to be met and for the autodelay to countdown all the way.
    • localsch.exe
  • 280907 Always reboot override option is never set in a reboot task
    • The user's selection for whether to pretend that a reboot is always needed was never being written to the policy.cfg file. Now we write "RebootAction" "always" if the box is checked. Otherwise, we don't add that field so as not to override whatever the reboot behavior setting is.
    • patchmanagement.dll

Remote Control

  • 263687 No warning appears if new a folder with the same name already exists when using HTML5 remote
    • Reason: it's not implemented. Fix: pop up warning when folder already exist.
    • filetransferdialog.js enurcstrings.xml chsrcstrings.xml
  • 263787 Foreign: HTML RC hotkeys are not localized
    • Reason: The elements of hotkey can't be localized. Fix: Make the elements can be localized.
    • index.html localization.js rc.js enurcstrings.xml chsrcstrings.xml
  • 282932 File Transfer UI is blank in legacy remote control
    • -
  • 282933 Alt+Tab when switching between HTML RC sessions keeps keyboard from working.
    • Reason: The Alt key up event can't be caught if the window loses focus. Fix: Send an up event when window loses focus.
    • rc.js
  • 286975 Special characters are still in QWERTY mode instead of AZERTY mode when doing a RC to a Mac OSX Yosemite in French
    • -
  • 288372 Cannot change IME (Input Method) setting when use legacy remote control chat
    • In legacy chat window hit "alt+·" will not lose focus. Installed Japanese and Romanian on English version, it will not lose focus when change language.
  • 289155 HTML Remote Control's File Transfer doesn't work in Japanese - Copied file name is GARBLED
    • Fixed double byte file name transfer problem so that the file name is not garbled.
    • filetransferhandler.cpp issuser.exe
  • 290962 LANDESK Remote Control service would stop and report error when the client was connected to core through CSA
    • -
  • 293362 <chat> tags showing in chat text from client
    • Reason: the <chat> tag is replaced by escape characters. Fix: Make the <chat> tag not be changed.
    • chatdialog.js

Reporting

  • 266656 When scheduling a report to csv that was created from a query that contains information with commas, the csv does not get created as expected.
    • Add quotation marks over each column.
    • LANDesk.ReportingServices.DataDynamicsReports.dll
  • 302935 CSV output of the Report doesn't work
    • One place in the code use ANSI to encoding and this will cause problem in some local system. Use UTF8 to encoding can solve this problem.
    • LANDesk.ReportingServices.DataDynamicsReports.dll
  • 304560 Power alert report display incorrect
    • This one is caused by a case sensitive mistakes.

Rollout Project

  • 279789 When selecting a device group to verify success rate, a root group is not allowed
    • Allow the users to select a root folder as a target.
    • LANDesk.ManagmentSuite.data.dll LANDesk.ManagementSuite.Winconsole.dll WorkflowUI.dll
  • 280664 Warning in WorkflowProcessor.Details.log when we "process now"
    • Add a call to VulnerabilityCache.LoadCache() so it'll update the cache for the current worker thread. This will avoid the display of a long-winded warning message that includes the call stack in the workflowprocessor's log.
    • workflowbiz.dll
  • 280669 Non-admin (but not scoped) user can't see any scopes in scope selector in "Success criteria"
    • Make sure the scope selector forms shows the user all scopes if he is in the "all machines" scope, even if the user management tool hasn't manually placed him in each of the other scopes as well. "All machines" means that the user can target to any scope.
    • winconsole.dll
  • 285814 In some scenarios a Rollout project exit criteria showing is "Scan record not found," which can be confusing
    • Reduce the sample size for non-platform-matching targets. This will improve the success rate by only evaluating devices associated with the vulnerability. SampleSize is now always applicable. Success rate is still reduced for machine's having no scan results. Fix "index out of range" when logging CVResults updates. Updated the UI to be more clear on how we calculated success rate, including a tooltip with explanation. More consistent column headers.
    • patchbiz.dll, workflowbiz.dll, workflowui.dll landesk.managementsuite.data.dll,
  • 287651 Success rate items remain grayed out when doing prev/next from paused step to play step
    • Move up the line "EnableEditableItems()" so it happens before we process loading any of the actual step data.
    • Workflowui.dll
  • 288005 Rollout projects, success criteria, select device group - unable to pick a root group
    • Allowing select root group.
    • WorkflowUI.dll
  • 289718 Unable to export a rollout project that references a query
    • Don't assume every referenced exportable is an eTask. Just treat them like exportables when serializing.
    • data.dll
  • 297047 The properties of imported scheduled tasks for processing rollout projects are changed.
    • -
  • 298626 Rollout projects - non-admin scoped user may be able to scope new tasks by another user
    • -
  • 298691 Rollout project email settings needs an "Enable TLS" checkbox
    • Added 'Use SSL' checkbox and hooked it up.
    • landesk.managementsuite.data.dll WorkflowBiz.dll WorkflowUI.dll
  • 305843 Software Deployment Processor fails when using Success Rate
    • Set software deployment workflow step list type to task.
    • WorkflowBiz.dll WorkflowUI.dll
  • 308196 The left icon will disappear from the screen when the last of the step name includes %
    • Fix incorrect treatment of step names containing percent signs.
    • landesk.managementsuite.winconsole.dll

Rollup

  • 260892 Rollup Core Replication failed with error about UNMODELEDDATASnapshot
    • If you re-snapshot a core and you see this error in UnmodeledData, delete the data from UnmodeledData on the rollup using the coreguid: delete from unmodeleddata where coreguid = 'xxxxx-xxxx-xxxx-xxxxxxx' The snapshot will then successfully apply to the rollup.
    • Landesk.Database.Replication.exe
  • 260893 Rollup Core Replication failed with error about BEHAVIORINFO2Snapshot
    • The BehaviorInfo2Snapshot trigger was updated to detect a re-snapshot scenario.
    • Landesk.Database.Replication.exe
  • 260895 Rollup Core Replication failed with error about ReplMETAOBJATTRRELATIONSV
    • When adding a publisher to LANDesk.Database.Replication.exe, the .exe will look for any duplicates in MetaObjAttrRelations and remove those duplicates before generating a snapshot for that publisher.
    • Landesk.database.replication.exe
  • 282886 Potential error with duplicated key 'dbo.MP_PART' on rollup core replication
    • The unique constraint on the rollup is both the computer_idn and mp_part_idn. Therefore, remove the unique constriant and just switch it to an index so the queries are still fast.
  • 287551 An unhandled exception may occur in the LANDESK Replication definition UI under certain conditions
    • If a user leaves a password blank, don't convert it to Base64String; leave it empty. The check on OK will detect the empty password.
  • 298360 Error window may appear when executing SQL Replication on rollup core
    • If there are schema changes to tables that have "snapshot" counterparts in the rollup database, we have to drop and re-create the snapshot tables in order to make sure we get the current list of columns in the snapshot tables.
    • landesk.database.replication.exe
  • 300160 LANDesk.Database.Replication.exe.log may contain sensitive data
    • Removed sensitive data from the script file and the .log file.

Scripts

  • 293174 The Status of a Scheduled Task for a Custom Script remains "Working" when 1 or several targeted machines are off (Hence not reachable)
    • Treat unreachable as a failure machine status.
    • LANDesk.ManagementSuite.Data.dll

SDK

  • 264874 MBSDK - "GetMachineData"-calls do not respect qualifiers
    • MBSDK now honors filter qualifiers.
    • mbsdkservice.dll

Shared Tech

  • 297178 Security Issue: CBA_ANONYMOUS logging in as batch account can be a concern for some customers
    • Changed the way CBA_ANONYMOUS is configured on Windows client systems. Previously it was added to the "Guests" group and was configured to require LogonAsBatch permissions and denied LogonInteractive. This was done to prevent the user from seeing the CBA_ANONYMOUS account as an option at the login screen. Because this configuration required additional GPO configuration to make it work right, CBA_ANONYMOUS has been changed to no longer be in the Guests group and is using LogonInteractive instead of LogonAsBatch. Because the account isn't in in a group such as Users, it still doesn't show up in the Windows logon screen.
    • ServiceHost.exe (and subsequently cba8inst.msi)

SLM

  • 278622 OS Products should not be removed from the ProductComputer table during calculations
    • Fixed OS products - Updated SLM calculations so that OS products are not removed from computers during calculations.
    • SAM.Business.dll
  • 290605 SLM fails to calculate on Rollup with SQL Replication
    • Made following fixes: SLM - OS Products should not be removed from the ProductComputer table during calculations Windows Server 2008/2012 R2 doesn't show as installed in SLM SLM fails to calculate on Rollup with SQL Replication
    • Sam.Business.dll

Software Distribution

  • 256596 Option "Allow LDAP resolution via CSA" doesn't work on LDAP machine group.
    • Reset buffer length when query machine group multi strings registry. Fixed for Ldap query and group object targeting via CSA.
    • ApmService.dll LocalRequest.dll ldapinfo.dll ldapwhoami.exe
  • 263012 Powershell packages with invalid commands return as successful
    • This is a power shell script error. Add if ($? -ne $true) { exit 1 } where exit value can be specified as your desired error code (not have to be 1).
    • None
  • 275186 Software app added to an existing bundle never arrives on device after running task a second time
    • Re-factored the backend IIS package xml cache so that it checks the package hash along with the package revision and return code template revision. Also rewrote the query to be more optimized and changed the drag n drop UI to update the package revision when moving/cloning packages in and out of bundles.
    • landesk.managementsuite.softwaredistribution.winui.dll landesk.managementsuite.softwaredistribution.business.dll
  • 275817 The name of default Schedule task template is the same with default patch template name.
    • -
  • 278244 Some packages may reinstall when targeting by LDAP users
    • If target to all users, build APM return target with device ID. If target to current user, build APM return target with targeted APM user name.
    • LANDesk.ManagementSuite.Data.dll DataMart.xml ApmService.dll LANDesk.ManagementSuite.SoftwareDistribution.WinUI.dll
  • 279782 Right-click import in task tool on a sub-group does not allow "Insert items into selected group or owner"
    • Fixed it
    • softwaredistribution.winui.dll
  • 279799 Custom message from template not in scheduled task
    • -
  • 280590 Package with dependent packages (or bundle) using always reboot setting may not continue after first reboot in some circumstances
    • Give a longer retry in case just boot up and proxy host is not ready.
    • sdclientlib.dll
  • 282894 Package still runs old file if the preferred server is not updated with the changed files.
    • Fixed an issue where a software distribution job doesn't download the latest file from source if it changed. Previously, it could still download an old copy from a preferred server.
    • lddwnld.dll
  • 284065 Discovery packets are not sent if TTL Expired packet received
    • The udp listen thread in pds2dis.dll was treating some socket errors as if they were non recoverable and was shutting down the thread, also breaking the sendping functionality. The listen thread will now just log and continue with those socket errors.
    • pds2dis(_x64).dll
  • 284065 Discovery packets may not be sent if a TTL Expired packet received
    • The udp listen thread in pds2dis.dll was treating some socket errors as if they were non recoverable and was shutting down the thread, also breaking the sendping functionality. The listen thread will now just log and continue with those socket errors.
    • pds2dis(_x64).dll
  • 284287 Software deployment task with deferral option starts immediately when custom message contains HTML code
    • Needed to modify the back-end javascript message parsing code to allow for custom HTML.
    • htmlcommon.js
  • 293389 Some packages will not install on certain Microsoft Windows 7 Embedded, 32-bit systems
    • Added Windows 7 Embedded as a viable platform for vulscan
    • Landesk.ManagmentSuite.SoftwareDistribution.Business.dll
  • 293484 Policy retry interval should be configurable
    • Added the ability to configure the PolicySync required policy retry period (in hours) to agent settings. This is on a per task basis.
    • PolicyData.dll PatchManagement.dll Winconsole.dll
  • 297261 Potential error when try to open the item location of a file's relationship
    • WinConsole crash fixed when trying to open location for distribution bundle file.
    • LANDesk.ManagementSuite.WinConsole.dll
  • 297355 Portal Manager displays TT for day and JJJJ for year in Last Run column on an English Windows 7 that has German MUI enabled
    • Update for Localization
    • LANDeskLaunchpadDLL.resources.dll
  • 298181 The APM Service may not function as expected for Mac and Mobile
    • Mobile make request with null parameters of ldapuser and ldapmachine. When do LodDebug need check if the parameter is null.
    • ApmService.dll
  • 298905 Add detection to GetPackageXML to prevent caching of "incomplete" package info
    • Generate package hash if not generated and doesn't rely on 9.5 global scheduler doing it.
    • PolicyTaskHandler.exe
  • 301425 Prov_Add detection to GetPackageXML to prevent caching of "incomplete" package info.
    • Using LDHashUtil_x64 do MD5 hash. Modified schedpkgupdate.exe with new command line switch /checkhash to hash all not hashed package files decoupled from task. Modified scheduler to regularly calling schedpkgupdate.exe for un-hashed files.
    • schdsvc.exe Landesk.ManagementSuite.SoftwareDistribution.Business.dll package.data.dll schedpkgupdate.exe
  • 302186 Modify policysync to have a random delay and retry for policies request to APMService
    • After 6 retry for 6 seconds each, generate a local scheduler job to run policy sync one more time with auto delay of 5 to 15 minutes.
    • PolicySync.exe
  • 303035 Streamed Documents may launch when policysync is run
    • Streamed document package default to optional / stay in portal.
    • LANDesk.ManagementSuite.SoftwareDistribution.WinUI.dll
  • 303364 When deploying a distribution package as a link, a non-admin user can't launch the package
    • Read registry key with read only permission.
    • sdclientlib.dll
  • 303774 Software Deployment tasks may get stuck when task names contain special UTF-8 characters
    • Using Encoding.UTF8 to read bytes for deserialize.
    • PolicySync.exe
  • 309387 Application Virtualization doesn't create destination folder on client
    • IsFileInCache return S_OK not a Boolean value.
    • sdclientlib.dll

Web Console

  • 214951 Critical exception may occur when attempting to add domain users to Remote Control Settings > Remote Control Operators Group
    • Using a .net method to enumerate the domain object rather than calling into an unmanaged dll.
    • rcbehaviorbiz.dll rcbehaviorui.dll

Files in this patch

administrationappview.xml
1.30kB
-
4/1/2016 10:05 AM
AdvanceAgent.exe
128.50kB
10.0.1.27
2/12/2016 10:58 AM
AgentServicesContainerWebService.dll
8.50kB
10.0.1.67
4/26/2016 8:17 AM
AMTConfig.Business.dll
71.50kB
10.0.1.72
5/4/2016 7:51 AM
AMTConfig.Data.dll
172.00kB
10.0.1.41
3/8/2016 1:50 PM
AMTConfig.WinUI.dll
328.50kB
10.0.1.41
3/8/2016 1:50 PM
amtmon.dll
384.00kB
10.0.1.72
5/4/2016 7:52 AM
AMTPlug.dll
228.00kB
10.0.1.41
3/8/2016 1:50 PM
ApmService.dll
72.00kB
10.0.1.67
4/26/2016 8:18 AM
apmservice.exe
246.00kB
10.0.1.27
2/12/2016 10:56 AM
appview.xml
1.88kB
-
4/1/2016 10:05 AM
AuditingService.dll
9.50kB
10.0.1.67
4/26/2016 8:17 AM
AVUI.dll
2.33MB
10.0.1.41
3/8/2016 1:53 PM
BrokerConfig.exe
370.93kB
10.0.1.50
3/22/2016 7:00 AM
BStrapOpts.dll
1.71MB
2.0.083
3/24/2016 7:34 AM
CaptureImageHandler.exe
325.50kB
10.0.1.71
5/3/2016 5:59 AM
CaptureImageHandler_x64.exe
403.00kB
10.0.1.71
5/3/2016 5:58 AM
cba8inst.msi
3.89MB
-
4/29/2016 10:04 AM
ChangeSettingsHandler.exe
411.50kB
-
3/29/2016 2:10 PM
clientaccesspolicy.xml
373.00 B
-
4/1/2016 10:05 AM
ClientConfig.dll
1.37MB
10.0.1.74
5/11/2016 2:24 PM
ClientConfigBehavior_Apply.dll
193.00kB
10.0.1.32
2/22/2016 8:15 AM
ClientConnectivityBehavior_apply.dll
143.50kB
-
2/22/2016 8:15 AM
ClientDBUtil.exe
129.50kB
10.0.1.27
2/12/2016 10:47 AM
CommonAgentSettingsProvider.dll
48.00kB
10.0.0.271
4/1/2016 10:05 AM
console_rptfiles.cab
1.01MB
-
2/18/2016 7:19 AM
core.secure.dll
76.00kB
10.0.1.67
4/26/2016 8:21 AM
Core.WebServices.dll
52.00kB
10.0.1.67
4/26/2016 8:21 AM
custjob.exe
635.55kB
10.0.1.27
2/12/2016 11:18 AM
CustJobLaunch.exe
121.50kB
10.0.1.27
2/12/2016 10:48 AM
CustomDataForms.dll
487.50kB
10.0.1.27
2/12/2016 10:51 AM
DashboardUI.dll
124.50kB
10.0.1.27
2/12/2016 10:57 AM
dashboardview.xml
830.00 B
-
4/1/2016 10:05 AM
DataDynamics.Reports.Diagnostics.dll
44.00kB
1.6.2260.8
4/1/2016 10:05 AM
DataDynamics.Reports.dll
2.71MB
1.6.2260.8
4/1/2016 10:05 AM
DataDynamics.Reports.Extensibility.dll
80.00kB
1.6.2260.8
4/1/2016 10:05 AM
DataDynamics.Reports.Rendering.Excel.dll
791.50kB
1.6.2260.8
4/1/2016 10:05 AM
DataDynamics.Reports.Rendering.Graphics.dll
152.50kB
1.6.2260.8
4/1/2016 10:05 AM
DataDynamics.Reports.Rendering.Html.dll
142.00kB
1.6.2260.8
4/1/2016 10:05 AM
DataDynamics.Reports.Rendering.Pdf.dll
1.96MB
1.6.2260.8
4/1/2016 10:05 AM
DataDynamics.Reports.Rendering.Word.dll
89.50kB
1.6.2260.8
4/1/2016 10:05 AM
DataDynamics.Reports.Rendering.Xml.dll
33.00kB
1.6.2260.8
4/1/2016 10:05 AM
DataDynamics.Reports.Web.dll
1.08MB
1.6.2260.8
4/1/2016 10:05 AM
Datamart.xml
808.79kB
-
3/29/2016 1:49 PM
DatamartPM.xml
49.58kB
-
2/24/2016 12:45 PM
DatamartSAM.xml
29.36kB
-
4/1/2016 10:05 AM
DeployImageHandler.exe
359.00kB
10.0.1.71
5/3/2016 5:59 AM
DeployImageHandler_x64.exe
445.00kB
10.0.1.71
5/3/2016 5:58 AM
DeviceCriteria.xml
804.00 B
-
4/1/2016 10:05 AM
DeviceNameHandler.exe
56.50kB
10.0.1.71
5/3/2016 5:58 AM
deviceview.xml
229.00 B
-
4/1/2016 10:05 AM
DocumentFormat.OpenXml.dll
4.99MB
2.0.5022.0
4/1/2016 10:05 AM
DownloadHandler.exe
335.50kB
-
2/26/2016 8:10 AM
DownloadHandler_x64.exe
359.00kB
-
2/26/2016 8:09 AM
EPSUI.exe
658.62kB
10.0.1.70
4/29/2016 10:56 AM
execviewer2.dll
147.00kB
10.0.1.71
5/3/2016 5:56 AM
FileReplUI.dll
716.00kB
10.0.1.28
2/16/2016 9:43 AM
gatewaybiz.dll
61.50kB
10.0.1.33
2/23/2016 7:03 AM
gatewayui.dll
210.00kB
10.0.1.35
2/25/2016 6:02 AM
genkey.exe
136.00kB
10.0.0.445
4/29/2016 9:44 AM
GetBases.exe
58.00kB
10.0.1.73
5/9/2016 12:39 PM
GPMM.exe
51.50kB
10.0.1.65
4/21/2016 7:33 AM
GPSWebServices.dll
18.50kB
10.0.1.67
4/26/2016 8:17 AM
GrapeCity.ActiveReports.Chart.v8.dll
2.57MB
8.0.133.0
4/1/2016 10:05 AM
GrapeCity.ActiveReports.Diagnostics.v8.dll
44.00kB
8.0.133.0
4/1/2016 10:05 AM
GrapeCity.ActiveReports.Document.v8.dll
496.50kB
8.0.133.0
4/1/2016 10:05 AM
GrapeCity.ActiveReports.Export.Document.v8.dll
309.00kB
8.0.133.0
4/1/2016 10:05 AM
GrapeCity.ActiveReports.Export.Excel.v8.dll
1.31MB
8.0.133.0
4/1/2016 10:05 AM
GrapeCity.ActiveReports.Export.Html.v8.dll
411.00kB
8.0.133.0
4/1/2016 10:05 AM
GrapeCity.ActiveReports.Export.Image.Unsafe.v8.dll
8.00kB
8.0.133.0
4/1/2016 10:05 AM
GrapeCity.ActiveReports.Export.Image.v8.dll
180.00kB
8.0.133.0
4/1/2016 10:05 AM
GrapeCity.ActiveReports.Export.Pdf.v8.dll
6.23MB
8.0.133.0
4/1/2016 10:05 AM
GrapeCity.ActiveReports.Export.Rdf.v8.dll
67.50kB
8.0.133.0
4/1/2016 10:05 AM
GrapeCity.ActiveReports.Export.Word.v8.dll
184.50kB
8.0.133.0
4/1/2016 10:05 AM
GrapeCity.ActiveReports.Export.Xaml.v8.dll
310.50kB
8.0.133.0
4/1/2016 10:05 AM
GrapeCity.ActiveReports.Export.Xml.v8.dll
117.50kB
8.0.133.0
4/1/2016 10:05 AM
GrapeCity.ActiveReports.Extensibility.v8.dll
156.00kB
8.0.133.0
4/1/2016 10:05 AM
GrapeCity.ActiveReports.OracleClient.v8.dll
11.00kB
8.0.133.0
4/1/2016 10:06 AM
GrapeCity.ActiveReports.v8.dll
7.16MB
8.0.133.0
4/1/2016 10:05 AM
GrapeCity.ActiveReports.Web.v8.dll
3.14MB
8.0.133.0
4/1/2016 10:05 AM
HIIClient.exe
792.00kB
10.0.1.28
2/16/2016 9:43 AM
HIIClient_x64.exe
1.01MB
10.0.1.28
2/16/2016 9:43 AM
htmldialog.exe
51.00kB
10.0.1.71
5/3/2016 5:58 AM
idal.dll
502.00kB
10.0.1.61
4/14/2016 7:40 AM
information.dll
24.00kB
10.0.1.67
4/26/2016 8:21 AM
interop.idallib.dll
19.50kB
9.5.0.0
4/14/2016 7:40 AM
Interop.IDALLib.dll
19.50kB
9.5.0.0
4/1/2016 10:05 AM
InventorySettingsBehavior_Apply.dll
61.50kB
-
2/22/2016 8:15 AM
issproxy.exe
337.50kB
10.0.1.71
5/3/2016 5:57 AM
issuser.exe
1.53MB
10.0.1.31
2/19/2016 8:53 AM
KavClient.cab
271.86MB
-
3/3/2016 1:26 PM
KavConnector.cab
3.52MB
-
3/3/2016 1:26 PM
KavMacClient.cab
142.49MB
-
3/3/2016 1:27 PM
LANDesk.Auditing.Archive.dll
15.50kB
10.0.1.27
2/12/2016 10:51 AM
LANDesk.Auditing.Business.dll
18.50kB
10.0.0.271
4/1/2016 10:05 AM
LANDesk.Auditing.Interfaces.dll
11.50kB
10.0.0.271
4/1/2016 10:05 AM
LANDesk.Auditing.Proxy.dll
16.50kB
10.0.0.271
4/1/2016 10:05 AM
LANDesk.AuthorizeToken.dll
10.50kB
1.0.0.255
4/1/2016 10:05 AM
LANDesk.Crypto.dll
144.50kB
10.0.0.271
4/1/2016 10:05 AM
LANDesk.Database.Replication.exe
288.00kB
10.0.1.49
3/21/2016 1:32 PM
LANDesk.DataServices.Database.dll
45.00kB
10.0.0.271
4/1/2016 10:05 AM
LANDesk.DataServices.dll
90.50kB
10.0.0.271
4/1/2016 10:05 AM
LANDesk.DataServices.Registry.dll
31.50kB
10.0.0.271
4/1/2016 10:05 AM
LANDesk.DataServices.Schema.dll
97.00kB
10.0.0.271
4/1/2016 10:05 AM
LANDesk.DrManAPI.dll
24.50kB
10.0.1.27
2/12/2016 11:01 AM
LANDesk.Gateway.Agent.dll
12.50kB
10.0.1.72
5/4/2016 7:53 AM
LANDesk.InspectorWeb.dll
14.50kB
10.0.1.67
4/26/2016 8:20 AM
LANDesk.Install.ReportQueryInstallerConsole.exe
11.00kB
1.0.0.0
4/1/2016 10:05 AM
LANDesk.Install.ReportQueryInstallTool.dll
28.00kB
1.0.0.0
4/1/2016 10:05 AM
LANDesk.LDPermissionsAndRights.dll
8.50kB
1.0.0.255
4/1/2016 10:05 AM
LANDESK.LM.Service.dll
54.00kB
10.0.1.19
4/13/2016 2:59 PM
LANDesk.ManagementSuite.Authentication.dll
170.50kB
10.0.1.41
3/8/2016 1:49 PM
LANDesk.ManagementSuite.Core.Anonymous.dll
44.00kB
10.0.1.67
4/26/2016 8:21 AM
LANDesk.ManagementSuite.CustomScripts.dll
28.00kB
10.0.0.271
4/1/2016 10:05 AM
LANDesk.ManagementSuite.Data.dll
1.21MB
10.0.1.74
5/11/2016 2:26 PM
LANDesk.ManagementSuite.Database.dll
172.00kB
10.0.1.59
4/11/2016 3:08 PM
LANDesk.ManagementSuite.Diagnostics.dll
112.00kB
10.0.0.271
4/1/2016 10:05 AM
LANDesk.ManagementSuite.HPBiosSettingsPolicy.Business.dll
13.00kB
10.0.0.271
4/1/2016 10:05 AM
LANDesk.ManagementSuite.Information.dll
324.00kB
10.0.0.271
4/1/2016 10:05 AM
LANDesk.ManagementSuite.Integration.dll
38.50kB
10.0.0.271
4/1/2016 10:05 AM
LANDesk.ManagementSuite.Queries.dll
36.00kB
10.0.0.271
4/1/2016 10:05 AM
LANDesk.ManagementSuite.RESTful.Resources.dll
91.00kB
10.0.1.67
4/26/2016 8:17 AM
LANDesk.ManagementSuite.RESTful.Service.dll
200.00kB
10.0.1.73
5/9/2016 12:40 PM
LANDesk.ManagementSuite.SoftwareDistribution.Apm.dll
39.00kB
10.0.0.271
4/1/2016 10:05 AM
LANDesk.ManagementSuite.SoftwareDistribution.Business.dll
840.00kB
10.0.1.53
3/25/2016 6:30 AM
LANDesk.ManagementSuite.SoftwareDistribution.Data.dll
136.00kB
10.0.0.271
4/1/2016 10:05 AM
LANDesk.ManagementSuite.SoftwareDistribution.Win32.dll
241.00kB
10.0.0.271
4/1/2016 10:05 AM
LANDesk.ManagementSuite.SoftwareDistribution.WinUI.dll
2.71MB
10.0.1.67
4/26/2016 8:18 AM
LANDesk.ManagementSuite.StyledForm.dll
75.50kB
10.0.1.59
4/11/2016 2:33 PM
LANDesk.ManagementSuite.TaskHandler.dll
20.00kB
10.0.0.271
4/1/2016 10:05 AM
LANDesk.ManagementSuite.ToolsXml.dll
20.00kB
10.0.1.50
3/22/2016 6:40 AM
LANDesk.ManagementSuite.WinConsole.dll
5.66MB
10.0.1.71
5/3/2016 6:12 AM
LANDesk.ManagementSuite.WinConsole.Win32.dll
163.50kB
10.0.0.271
4/1/2016 10:05 AM
LANDESK.MDM.Console.dll
501.50kB
10.0.1.19
4/13/2016 2:59 PM
LANDESK.MDM.Services.dll
330.50kB
10.0.1.19
4/13/2016 2:59 PM
LANDesk.Provisioning.Business.dll
720.00kB
10.0.1.59
4/11/2016 2:37 PM
LANDesk.Provisioning.Business.TaskMan.dll
76.00kB
10.0.1.27
2/12/2016 10:57 AM
LANDesk.Provisioning.Data.dll
180.00kB
10.0.1.53
3/25/2016 6:23 AM
LANDesk.Provisioning.WinUI.dll
3.07MB
10.0.1.68
4/27/2016 6:50 AM
LANDesk.ReportingServices.DataDynamicsReports.dll
376.00kB
10.0.1.60
4/13/2016 10:47 AM
LANDesk.ReportingServices.dll
39.00kB
10.0.0.271
4/1/2016 10:05 AM
LANDesk.Scheduler.TaskHandler.dll
313.50kB
10.0.1.54
3/29/2016 2:17 PM
LANDesk.SmartVue.WinConsole.Charts.dll
299.00kB
10.0.1.32
2/22/2016 8:16 AM
LANDesk.WebServiceSecurity.dll
11.50kB
1.0.0.255
4/1/2016 10:05 AM
Lclxclnt.dll
28.50kB
-
2/12/2016 10:42 AM
lclxsvc.dll
134.50kB
10.0.1.27
2/12/2016 10:47 AM
ldapinfo.dll
165.50kB
10.0.1.27
3/8/2016 1:44 PM
ldapwhoami.exe
122.00kB
10.0.1.41
3/11/2016 11:12 AM
LDAV.exe
1,003.63kB
10.0.1.54
3/29/2016 2:37 PM
ldavhlpr.dll
792.00kB
10.0.1.59
4/11/2016 2:37 PM
ldcache.dll
950.50kB
10.0.1.61
4/14/2016 7:39 AM
lddwnld.dll
958.50kB
10.0.1.41
3/8/2016 1:39 PM
lddwnld_x64.dll
1.38MB
10.0.1.41
3/8/2016 1:39 PM
lddwnldClassLib.dll
140.00kB
-
3/8/2016 1:40 PM
LDEncrypt.exe
94.84kB
10.0.1.27
2/12/2016 11:18 AM
LDHashUtil_x64.dll
70.00kB
-
2/12/2016 10:41 AM
ldHpCommon.dll
255.27kB
10.0.1.54
3/29/2016 2:37 PM
LDInv32.exe
5.16MB
10.0.1.59
4/11/2016 2:35 PM
LDInvHandler.dll
10.50kB
10.0.1.67
4/26/2016 8:21 AM
ldiscn32.exe
2.80MB
10.0.1.66
4/22/2016 9:53 AM
LDProfile.exe
590.00kB
10.0.1.27
2/12/2016 10:47 AM
ldPropertySheet.dll
64.00kB
10.0.1.27
2/12/2016 10:44 AM
ldProvision.exe
574.00kB
10.0.1.52
3/24/2016 7:34 AM
ldprovision_config.windows.xml
6.16kB
-
3/24/2016 7:24 AM
ldProvision_x64.exe
725.00kB
10.0.1.52
3/24/2016 7:34 AM
ldReboot.exe
3.54MB
10.0.1.32
2/22/2016 8:13 AM
ldrunner.exe
84.00kB
10.0.1.27
2/12/2016 10:49 AM
LDSecSvc.exe
1.87MB
10.0.1.73
5/9/2016 12:59 PM
LDSecSvc64.exe
2.40MB
10.0.1.73
5/9/2016 12:59 PM
LDSetTPM.exe
22.00kB
10.0.1.54
3/29/2016 2:17 PM
LDSystemEventCapture.dll
1.79MB
10.0.1.60
4/13/2016 10:46 AM
LDWFMgr.exe
135.50kB
10.0.1.27
2/12/2016 10:58 AM
LocalRequest.dll
64.50kB
10.0.1.41
3/8/2016 1:43 PM
LocReport.exe
14.00kB
10.0.0.271
12/16/2015 2:34 PM
log4net.dll
252.00kB
1.2.10.0
4/1/2016 10:05 AM
LtaEap.dll
294.51kB
10.0.1.27
2/12/2016 11:18 AM
LtaEap64.dll
349.84kB
10.0.1.27
2/12/2016 11:18 AM
ltapi.dll
203.00kB
10.0.1.27
2/12/2016 10:48 AM
MAKECAB.dll
2.58MB
10.0.1.27
2/12/2016 10:44 AM
Manageldappl.dll
620.50kB
10.0.1.31
4/1/2016 10:05 AM
ManageLdappl.dll
620.50kB
10.0.1.62
4/15/2016 8:40 AM
MBSDKService.dll
144.00kB
10.0.1.67
4/26/2016 8:20 AM
MDM.Datamart.xml
6.66kB
-
4/13/2016 2:59 PM
MDM.dll
44.00kB
10.0.1.19
4/13/2016 2:59 PM
MDM.LDMS.Services.dll
80.50kB
10.0.1.19
4/13/2016 2:59 PM
MDMManagementService.exe
19.00kB
10.0.1.19
4/13/2016 2:59 PM
MergeXml.exe
8.50kB
9.50.0.504
4/1/2016 10:05 AM
Microsoft.Practices.ServiceLocation.dll
29.06kB
1.0.0.0
4/1/2016 10:05 AM
Microsoft.Practices.Unity.dll
130.80kB
2.0.414.0
4/1/2016 10:05 AM
Microsoft.Practices.Unity.xml
354.40kB
-
4/1/2016 10:05 AM
miniscan.exe
145.50kB
10.0.1.64
4/20/2016 8:53 AM
miniscan_x64.exe
184.50kB
10.0.1.64
4/20/2016 8:53 AM
nav_main.xml
846.00 B
-
4/1/2016 10:05 AM
NicRestart.exe
122.50kB
10.0.1.27
2/12/2016 11:18 AM
NicRestart64.exe
155.19kB
10.0.1.27
2/12/2016 11:18 AM
OtherSecurityBehavior_apply.dll
200.00kB
-
2/22/2016 8:15 AM
package.data.dll
104.00kB
10.0.1.68
4/27/2016 6:49 AM
PanelManager.dll
364.00kB
10.0.1.33
2/23/2016 7:04 AM
PanelObjectInterface.dll
20.00kB
10.0.1.27
2/12/2016 10:44 AM
ParseMsi.dll
1.74MB
10.0.1.27
3/11/2016 11:32 AM
ParseMsi_x64.dll
2.39MB
10.0.1.27
3/11/2016 11:32 AM
PatchBiz.dll
1.46MB
10.0.1.68
4/27/2016 7:03 AM
PatchHandler.exe
321.50kB
10.0.1.54
3/29/2016 2:10 PM
PatchHandler_x64.exe
388.00kB
10.0.1.54
3/29/2016 2:06 PM
PatchManagement.dll
9.86MB
10.0.1.70
4/29/2016 10:55 AM
pds2dis.dll
185.50kB
10.0.0.445
4/29/2016 9:39 AM
pds2dis_x64.dll
213.50kB
10.0.0.445
4/29/2016 9:40 AM
PlatformSettingsBehavior_Apply.dll
54.00kB
-
2/22/2016 8:15 AM
PolicyData.dll
53.50kB
10.0.1.41
3/8/2016 1:42 PM
PolicySync.exe
77.24kB
10.0.1.59
4/11/2016 3:24 PM
PortalManagerBehavior_apply.dll
82.50kB
10.0.1.32
2/22/2016 8:15 AM
PreferredServer.dll
16.00kB
10.0.1.67
4/26/2016 8:18 AM
prov_loaddb.exe
16.00kB
10.0.1.52
3/24/2016 8:30 AM
prov_schedule.exe
36.00kB
10.0.1.27
2/12/2016 10:57 AM
ProvisionGUI.exe
602.00kB
10.0.1.66
4/22/2016 9:35 AM
ProvisionGUI_x64.exe
601.00kB
10.0.1.52
3/24/2016 7:34 AM
Provisioning.Secure.dll
28.00kB
10.0.1.67
4/26/2016 8:20 AM
ProvisioningWebService.dll
40.00kB
10.0.1.67
4/26/2016 8:20 AM
PWMBehavior_Apply.dll
82.00kB
-
2/22/2016 8:16 AM
rainstall.exe
289.46kB
10.0.0.445
4/29/2016 10:04 AM
RCBehavior_apply.dll
150.50kB
10.0.1.32
2/22/2016 8:15 AM
RCBehaviorBiz.dll
36.50kB
10.0.1.54
3/29/2016 2:17 PM
RCBehaviorUI.dll
164.50kB
10.0.1.54
3/29/2016 2:17 PM
remotecontrol.dll
40.00kB
10.0.1.67
4/26/2016 8:21 AM
RemoteControlLogging.dll
16.00kB
10.0.1.67
4/26/2016 8:21 AM
ReportQueries.xml
30.92kB
-
4/1/2016 10:05 AM
reportsview.xml
234.00 B
-
4/1/2016 10:05 AM
restartmon.exe
103.91kB
-
2/12/2016 11:18 AM
rollupcore_rptfiles.cab
995.83kB
-
2/18/2016 7:19 AM
rptfiles.cab
1.04MB
-
2/18/2016 7:19 AM
runasuserlibrary.dll
63.50kB
10.0.1.54
3/29/2016 2:07 PM
SAM.Business.dll
619.00kB
10.0.2.1
4/1/2016 10:05 AM
SAM.Client.UI.Web.dll
397.50kB
10.0.2.1
4/1/2016 10:06 AM
SAM.Services.dll
49.00kB
10.0.2.1
4/1/2016 10:05 AM
SAM.Services.Web.dll
7.50kB
10.0.2.1
4/1/2016 10:05 AM
SAM.WinConsole.dll
6.00kB
10.0.0.1
4/1/2016 10:05 AM
sam_main.xml
846.00 B
-
4/1/2016 10:05 AM
SAMContentUpdate.exe
31.50kB
10.0.2.1
4/1/2016 10:05 AM
ScanInstructions.dll
8.50kB
10.0.1.67
4/26/2016 8:21 AM
ScanInstructionsData.dll
11.50kB
10.0.1.41
3/8/2016 1:54 PM
schedpkgupdate.exe
56.00kB
10.0.1.65
4/21/2016 7:33 AM
schedsvc.exe
281.00kB
10.0.1.53
3/25/2016 6:22 AM
SchedulerSettingsBehavior_Apply.dll
61.50kB
-
2/22/2016 8:15 AM
schedwol.exe
219.00kB
10.0.1.54
3/29/2016 2:16 PM
SDClientHandler.exe
358.00kB
10.0.1.54
3/29/2016 2:10 PM
SDClientHandler_x64.exe
389.50kB
10.0.1.54
3/29/2016 2:06 PM
sdclientlib.dll
569.00kB
10.0.1.73
5/9/2016 12:39 PM
sdistmsi.exe
188.50kB
10.0.1.54
3/29/2016 2:11 PM
sdistps1.exe
251.75kB
10.0.1.54
3/29/2016 2:37 PM
sdistscript.exe
230.50kB
10.0.1.54
3/29/2016 2:12 PM
sdistvapp.exe
246.00kB
10.0.1.54
3/29/2016 2:11 PM
SelfElect.dll
465.50kB
-
2/12/2016 10:40 AM
SelfElect_x64.dll
589.00kB
-
2/12/2016 10:41 AM
ServerAuthentication.dll
20.00kB
10.0.1.67
4/26/2016 8:18 AM
setup.exe
2.74MB
9.60.0.105
3/3/2016 7:16 AM
Setup10.exe
36.14MB
10.1.1157
3/27/2016 9:43 PM
ShutdownReboot.dll
133.00kB
10.0.1.27
2/12/2016 10:48 AM
SLConsole.dll
20.50kB
10.0.2.1
4/1/2016 10:05 AM
SLM.LdAppl3.dll
29.50kB
10.0.2.1
4/1/2016 10:05 AM
SLM.Routines.exe
10.00kB
10.0.2.1
4/1/2016 10:05 AM
softmon.exe
726.02kB
10.0.1.48
3/18/2016 11:50 AM
StatusEvents.dll
11.00kB
10.0.1.67
4/26/2016 8:20 AM
SubSonic.Core.dll
292.50kB
3.0.0.18338
4/1/2016 10:05 AM
Terminate.exe
156.00kB
10.0.1.3
12/18/2015 1:24 PM
ThinClientWebService.dll
15.00kB
10.0.1.67
4/26/2016 8:17 AM
tmcdll.dll
1.09MB
-
2/12/2016 10:40 AM
tmcdll_x64.dll
1.43MB
-
2/12/2016 10:41 AM
tmcsrvr.dll
122.50kB
10.0.1.27
2/12/2016 10:42 AM
tmcsvc.exe
216.54kB
10.0.1.27
2/12/2016 11:18 AM
tmcsvc_x64.exe
258.00kB
10.0.1.27
2/12/2016 10:41 AM
UserManagement.Business.dll
202.50kB
10.0.0.271
4/1/2016 10:05 AM
UserManagement.Common.dll
46.00kB
10.0.0.271
4/1/2016 10:05 AM
UserManagement.Data.dll
40.00kB
10.0.0.271
4/1/2016 10:05 AM
VerifySig.exe
23.00kB
-
2/12/2016 10:47 AM
Version.xml
86.00 B
-
12/3/2015 9:05 AM
VIBlend.WinForms.Controls.dll
996.00kB
10.1.0.0
4/1/2016 10:05 AM
VIBlend.WinForms.Utilities.dll
677.00kB
10.1.0.0
4/1/2016 10:05 AM
vulscan.dll
5.71MB
10.0.1.67
4/26/2016 8:19 AM
vulScan.exe
137.59kB
10.0.1.27
2/12/2016 11:18 AM
WFMaintenanceWindow.exe
48.00kB
10.0.1.27
2/12/2016 10:58 AM
WindowsTenUpdateHandler.exe
623.50kB
10.0.1.52
3/24/2016 7:34 AM
WorkflowBiz.dll
139.50kB
10.0.1.61
4/14/2016 7:41 AM
WorkflowUI.dll
1.31MB
10.0.1.65
4/21/2016 7:34 AM
wscfg32.exe
498.70kB
10.0.1.54
3/29/2016 2:37 PM
WSVulnerabilityCore.dll
64.00kB
10.0.1.67
4/26/2016 8:18 AM
XmlConfigMerge.dll
24.00kB
1.2.0.0
4/1/2016 10:05 AM