1 Reply Latest reply on May 26, 2010 4:29 AM by phoffmann

    capture and deploy xp in LDMS with WINPE

    Rookie

      Hi,

      I am  in LDMS 9, downloaded waik to activate WINPE; but it seems that this waik is for vista. I ask if it is possible to capture and deploy Windows Xp in this configuration. If yes is there any else configuration to do or capture and deploy process go automatically.

      THanks for help.

        • 1. Re: capture and deploy xp in LDMS with WINPE
          phoffmann SupportEmployee

          The WAIK is needed more for a legal thing (we need to check you have a valid WiNPE thing), you don't actually need to configure WAIK.

           

          You do need to set up the relevant bits in LANDesk (I.e. - make sure you've rolled out a PXE Representative, that you have the relevant OSD scripts...).

           

          But in regards to WAIK (if that's what your question is about), then no - you do not need to configure it at all. All it was is just an "enablement" tool so we could ensure (from a legal standpoint) that all is well, as it were.

           

          Does this answer your question?

           

          - Paul Hoffmann

          LANDesk EMEA Technical Lead