LanDesk is giving an error when trying to boot and image a machine.
The error states that the IP address is already in use, if you continue past it and begin the imaging process it comes up with:
Error 7361: IPX or NetBIOS must be running in order to load the network services
It then states that the WORKSTATION service is not started and would you like to start it. Choosing Y or N both result in it hanging and not continuing to image.
I tried the following and it did not work.
There are 3 settings in the bios you need to change before you get PXE boot (NIC) in the boot menu:
-Integrated devices: NIC set to On w/PXE
-Wake on Lan (remote wakeup): on w/ PXE
-System security: PXE policy set to Accept
Now you'll probably need to save these settings first and then go back in the bios and change the boot menu to PXE first