What LANDesk version are you running?
What Dell Driver did you use?
If you use the original LANDesk 9 Windows PE, you have to integrate the drivers for VISTA (!) not for Windows 7, otherwise it won't work.
The WinPE package on Dell page has included the drivers vor Windows PE 3 (aka Windows 7)!
If you use the former LANDesk version 8.7 / 8.8 you've to integrate the XP drivers.
These are the drivers that I show should be the correct ones:
if you extract that folder, it should be INTEL_825XX-GIGABIT-PLATFORM_A02_R247419\xp32
which for me shows this:
hope that helps!
Ok i will test it thx very much.
I will tell you if it's ok.
1 of 1 people found this helpful
That's the name of the driver, not the version . These are the Vista drivers...
The real version is written in the INF file and as detail info in the SYS file.
Windows XP/Windows PE 1.x: e1e5032, e15132
Windows Vista/Windows PE 2: e1e6032,..., e1y6032
Windows 7/PE 3(?): e1e6232...
OOoops ! sorry ....
Ok ok, i will use the Xp one then.
Thx for your answer...
Thx again for this driver.