1 Reply Latest reply on Jan 19, 2011 1:55 AM by Benjamin THIEN

    Profil migration - retore failed !

    Benjamin THIEN Specialist

       

      Hi,

       

      I have problem to restore a profil, i use LD 8.8

      This profil provide from WinXP to a WinXP

       

       

      "Machine","CbaStatus","ExitCode","Duration","Begin","End","Command"

      "BTHIEN-TEST","OK",1,0:00:02,19/01/2011 09:56:22,19/01/2011 09:56:24,"cmd /c mkdir "C:\Program Files\LANDesk\LDClient""

      "BTHIEN-TEST","OK",0,0:00:05,19/01/2011 09:56:24,19/01/2011 09:56:29,"<qt/>C:\Program Files\LANDesk\LDClient\sdclient.exe<qt/> /f /o /p="http://192.168.128.7/ldlogon/LDProfile.exe", STATUS"

      "BTHIEN-TEST","OK",0,0:00:03,19/01/2011 09:56:29,19/01/2011 09:56:32,"<qt/>C:\Program Files\LANDesk\LDClient\sdclient.exe<qt/> /f /o /p="http://192.168.128.7/ldlogon/Authenticate.exe", STATUS"

      "BTHIEN-TEST","OK",0,0:00:03,19/01/2011 09:56:32,19/01/2011 09:56:35,"<qt/>C:\Program Files\LANDesk\LDClient\sdclient.exe<qt/> /f /o /p="http://192.168.128.7/ldlogon/profiletemplate.msi", STATUS"

      "BTHIEN-TEST","OK",0,0:00:03,19/01/2011 09:56:35,19/01/2011 09:56:38,"<qt/>C:\Program Files\LANDesk\LDClient\sdclient.exe<qt/> /f /o /p="http://192.168.128.7/ldlogon/jscript.v55", STATUS"

      "BTHIEN-TEST","OK",0,0:00:03,19/01/2011 09:56:38,19/01/2011 09:56:41,"<qt/>C:\Program Files\LANDesk\LDClient\sdclient.exe<qt/> /f /o /p="http://192.168.128.7/ldlogon/vbscript.v55", STATUS"

      "BTHIEN-TEST","OK",0,0:00:02,19/01/2011 09:56:41,19/01/2011 09:56:43,"<qt/>C:\Program Files\LANDesk\LDClient\sdclient.exe<qt/> /f /o /p="http://192.168.128.7/ldlogon/pmexclude.lst", STATUS"

      "BTHIEN-TEST","OK",0,0:00:00,19/01/2011 09:56:43,19/01/2011 09:56:43,"<qt/>C:\Program Files\LANDesk\LDClient\authenticate.exe<qt/> /unc="\\pxe\Capture" /d="NORDNETDOM" /u="bthien_adm" /p="20A85BB9E79BD93C21817129A815787C6A555697631", STATUS"

      "BTHIEN-TEST","ERR_Fail",-1905000348,0:00:01,19/01/2011 09:56:43,19/01/2011 09:56:44,"<qt/>C:\Program Files\LANDesk\LDClient\LDProfile.exe<qt/> /put CABPATH="\\pxe\Capture\Profil\09DAF-NBROSSARD\[email protected]\BTHIEN-TEST" DEFAULTPASSWORD="1057450AB3553F16EF721031652", STATUS"

      ; "Job Complete","0 Done"," 1 Failed","0 Off","0 Unknown"

       

      Anyone can help me ?

      Thx