Can you see the message below on the BSD ?
Do you check the SATA operation ? AHCI, ATA.... in the bios ?
My return code: 65451
and failed result: Unknown status code (0x8DB9FFAB,3513:65451)
return code: -85
I have check the AHCI, ATA modus in the bios,
That not solved my problem.
What is the model of computer you use ?
It's a HP Z400 serial nr. CZC20FF5T
and a HP Compaq 6200 PRo serial nr. CZC0345QQR
the image is made in VMWare
When i made a image on the Compaq 6200,
and that same image deploy to this pc it works.
images must be independent!
Do you have tried to boot pxe menu and choose WINPE provisioning, you will see all the step maybe you can find the error easily.
That the way i do.
This morning I started the PC en choose WINPE provisioning,
but I can't loading a template!
when I try the standard from landesk,
The "Basis Deploy Image" show error:
that's my first problem from today =$
Ben your answers are very good,
every time I come a step further.
If you capture the image in VMWare you need to use sysprep with the /generalize option to be able to deploy it back to physical hardware.