Have you installed the ElitePad Patch? I ask because this may be a 32 bit winPE vs a 64 bit WinPE issue. Do you see a Windows 8 logo when pe boots or is it the Windows 7 version? If it is the Windows 8, then the issue may be that you need the 64 bit vs of ghost.
In 9.5 you need to have the path where you image is setup as a preferred server. It can be setup to not allow clients to connect using an IP range that clients will never use. This allows the deploy action to get credentials that it can then use to map/access the path where the image file is.
Thanks so much, that fixed my issue! I had my image capturing and deploying from our file server, set our file server as a preferred server and BAM started working. Thanks!
FYI, for some reason it was working fine with OSD, just not when I started trying to do it with provisioning.