1 Reply Latest reply on May 27, 2014 8:56 AM by JoeDrwiega

    upgrade from 9 to 9.5

    Rookie

      we are using ver 9 SP2 and just installed ver 9.5SP2 on a new 2008R2 box with same Netbios name as original one (old has NIC disabled)

      I copied sertificates and configured coms to run under same users as the old one.

      after few hours I can see most of clients listed in the console but no full scan. Whe try to force full invendory scan all stations are failing

      with return error codes 21474836xx    

      Machine","CbaStatus","ExitCode","Duration","Begin","End","Command"

      "EE-DSKTP-016","OK",-2147483645,0:00:01,5/21/2014 10:19:22 AM,5/21/2014 10:19:23 AM,"<qt/>c:\ldclient\LDISCN32.EXE<qt/> /NTT=LANDESK:5007 /S="LANDESK" /I=HTTP://LANDESK/ldlogon/ldappl3.ldz /NOUI /NOCD /F /sync"

      "MEG-DSKTP-003","OK",-2147483646,0:00:01,5/21/2014 10:19:22 AM,5/21/2014 10:19:23 AM,"<qt/>c:\ldclient\LDISCN32.EXE<qt/> /NTT=LANDESK:5007 /S="LANDESK" /I=HTTP://LANDESK/ldlogon/ldappl3.ldz /NOUI /NOCD /F /sync"

      "MT-DSKTP-003","OK",-2147483646,0:00:01,5/21/2014 10:19:22 AM,5/21/2014 10:19:23 AM,"<qt/>c:\ldclient\LDISCN32.EXE<qt/> /NTT=LANDESK:5007 /S="LANDESK" /I=HTTP://LANDESK/ldlogon/ldappl3.ldz /NOUI /NOCD /F /sync"

      "IT-FL8P1E20PNB5","OK",-2147483646,0:00:01,5/21/2014 10:19:22 AM,5/21/2014 10:19:23 AM,"<qt/>c:\ldclient\LDISCN32.EXE<qt/> /NTT=LANDESK:5007 /S="LANDESK" /I=HTTP://LANDESK/ldlogon/ldappl3.ldz /NOUI /NOCD /F /sync"

      "PEG-DSKTP-001","OK",-2147483646,0:00:01,5/21/2014 10:19:22 AM,5/21/2014 10:19:23 AM,"<qt/>c:\ldclient\LDISCN32.EXE<qt/>

      any Ideas?

      thank you

      Leo