The error is on line 77 of the answer file. The answer file is called unattend.xml and is used to give all the command you would enter during the windows installation.
Search for the unattend.xml somwhere in your taks and open it with notepad ++ to have an easy overview of which line you have. Go to line 77 column 9 and give the error as the information you are giving is not telling much.
I had fought with this issue for quite some time. It would always vary which line it would fail on and whenever I looked at the failing unattend, there would be nothing after that line, just completely blank.
I had previously been leaving my base image in audit mode before capturing. I generalized the base before capture and have not had that issue since. (knock on wood)
the only time i see a problem with the unattend file is if there is an error in it.
Also the unattend.xml part of building a machine is essentially not LANDesk. Its the one part of Provisioning that is all microsoft.
How are you creating the xml file? Are you using the Windows ADK?
yes i am using windows AIK , but i dont know how to capture the image using LANDESK 9.5 AND I HAVE 3 DIFFERENT MODELS , CAN SOME EXPLAIN HOW SHOULD I CAPTURE THE IMAGE .........THANK YOU VERY MUCH
Ok you need to check Microsoft resources.
Once you have Sysprepped the machine you want to capture you need to use a capture tool such as DISM.
This will create a wim file for you top deploy with LANDesk