Hi
I want to push out windows 7 using provisioning and using the install.wim as the setup. I do not want to capture an image first and then deploy it.
This is what I have got so far, I have already, deleted partitions and used auto assign to create the new ones in another template. it fails giving me the error:
FAILED
Error: [80001803H] The action failed
execute result:
return -1
output:
Any ideas please.
Attached is a screen shot of the log, could not really see anything which is handy
Not really. Did you check the deployimagehandler.log too?
Your ldprovisiong.log shows "Reporting action status: 5 to core" and it should be translated to "access denied".
You may need to add an action to map the share containing your .wim before deploing it and your deploing action will need to use the UNC path like "mapped_driver\folder\subfolder\whatever\install.wim"
Also, did you set your core as preferred server? (take a look here: )
Hi,
Mapping a drive before deploying image still fails. I have even pointed the install.wim via the UNC and then the mapped drive letter.
It seems the same issue described here:
the solution is to add preferred servers
And you share mapping works without problem?
You can try to give your user admin rights, who connects to the preferred server or core server.
Have you checked that the auto assign partitions did work correctly?
If you run diskpart while in WinPE you can see the volumes listed and their drive assignments. As imagex is file based and trying to write to the c drive if this is not setup properly your image action will fail.
