If you are having trouble with the Scan Terminator, try using a scan handler.
A(0)[A\\0D] should do the trick.
Where can you configure the Scan Handler in the MC3200 Adnroid 184.108.40.20640 Client?
Unfortunately Android does not have the scan handler functionality at this time.. The \0D should be present with the 4540 clients
1 of 1 people found this helpful
The Datawedge configuration is required for basic scanning functionality on the Android TE Client. The addition of the TE 4540 clients Scan Terminator \0D was tested to work when properly configured. Additional scan configurations require Datawedge scanning configuration changes.