We use Terabyte technology for capturing images. So, please start with the documentation referred in https://community.landesk.com/support/docs/DOC-35460
And you may need to capture it one by one and then deploy one by one; I saw an example like;
Z:\imagew.exe /b /d:0@1 /rb:0 /f:”z:\partition1.tbi”
Z:\imagew.exe /b /d:0@2 /rb:0 /f:”z:\partition2.tbi”
I hope it will help, but don't hesitate to share that
Good luck! Sebastien.
Just create a new provisioning template, then add action "capture image". Select image type = LANDESK ImageW V2, enter target path and click on validate.
This will create the command line to capture all partitions from disk 0.
/d:0@1 is for capturing disk 0 partition 1
/d:0 is for capturing complete disk 0 with all partitions.
/d:1 is for capturing complete disk 1 with all partitions.
and so on...
btw. this way also works for restore.So you can deploy single partions from the image if you want.
Remember disks start at 0, partitions start at 1.
Hope this information helps
I had already got it but the above was the right answer.