1 of 1 people found this helpful
Hello & welcome to the LANDesk community.
If I read your problem correctly, I think I know what it is & it should be pretty simple to fix / correct.
So - your report (I'm using "Detected Vulnerabilities") is going to look like this at the moment, correct?
So - what you need to do, is the following:\
- In the *TOP LEFT* corner, click on the "Toggle Sidebar" button (highlighted in this picture).
- With the SIDEBAR enabled, you want to click the 3rd button in the BOTTOM LEFT - that brings up the PARAMETERS option.
- With this screen up, you will want to change the "Autofix" setting from "Enabled" to either (as you prefer):
- Enabled or Disabled
- ... and then click on "VIEW REPORT" again
... now the report will be re-generated, with your settings.
The chosen default of showing only vulnerabilities that have AUTOFIX set to enabled is "a choice" - and whichever choice would've been made wouldn't be the right default one for all situations. So - now that you know where & how you can change your report to display the data you want - you should be able to operate as you desire .
That should hopefully sort you out.
at this time, I set out to verify this report, Thank you! as you will soon tell if I was functional!