2 Replies Latest reply on Jul 3, 2009 4:01 AM by Cedric FRANCOIS

    OSD failed on format command

    Cedric FRANCOIS Apprentice

      Hello,

       

      Since i have updated with SP3, i got the following message at the first step of the WinPE OS Deployment (cmd /c format /Y /FS:NTFS /Q /V:C-Drive c:)

       

      "This program has been damaged, possibly by a bad sector of the hard drive or a virus. Please reinstall it."

       

      Any idea ?

      i try putting back the old (8.8 sp2) peboot.img, it is the same

      the problem happen on 2 new machine, with no hard disk problem ...

       

      Regards

        • 1. Re: OSD failed on format command
          Cedric FRANCOIS Apprentice

          Hello,

           

          I mustbe mistaking on the step where the OSD failed.

          A command window display "Processing partition 1 of 2" so it is during the imagew process.

           

          I try to launch imagew manually and i get the same problem

          I try using the one in 2.0 : Error while unpacking program, code LP5. PLease report to author

          I restore the old imagew.exe (from 8.8 SP1 version) : same as the first problem

           

          The corrupted imagew.exe has no known virus (Symantec Endpoint 11), is weight is 904 Ko (instead of 884ko) and his date is 23/05/2008 15:05

          I don't understand why but the restored one has changed is weight during osd ...

          • 2. Re: OSD failed on format command
            Cedric FRANCOIS Apprentice

            Hello

            Sorry but we have a virus (call virut) on our core

            It's resolved

             

            Thanks