1 Reply Latest reply on Sep 2, 2009 7:06 AM by Mach6

    Error trying to Capture Image in OSD Deployment




      I am running Landesk Management Suite 8.8 SP3 and I am currently trying to setup Image Cloning and Deployment through the OSD Deployment Tab


      On the Core server I have :

      1: setup the OSD WinPE Capture Script

      2: Configured the PXE Boot menu

      3: Installed a PXE Representative


      On the Desktop PC I start the PC and Access the PXE Menu

      I select Landesk Dos Menu

      Select Capture and then select my WinPE Capture Script


      The script starts


      On the Desktop Pc  I get a screen which has:

      "LANDesk Management Agent

           Ip Address of PC

           Mac address of PC

      Waiting for Command"


      On Core Server I get

      Command:  REMPING16=WINPE, Timeout =1800


      The Log file will read:


      "PCname","CBA_ERROR:-1917761387",-1917761387,0:30:00,01/09/2009 15:58:47,01/09/2009 16:28:47,"WINPE, TIMEOUT=1800"
      ; "Job Complete","0 Done","1 Failed","0 Off","0 Unknown"



      Any help with fixing this would be greatfully appreciated



        • 1. Re: Error trying to Capture Image in OSD Deployment

          It looks like you set up a WinPE task but are trying to run it in DOS PE.  The two environments have different tools, and therefore different commands.  The line that is failing is essentially LANDesk saying, "I know I need to be in WinPE for this task.  Let me known when you're there."  Of course, since you're in DOS PE, that response is never properly given, so the task times out after 30 minutes (1800 seconds) of waiting.


          Try running the task from WinPE.